Aastra RFP 32 Help ?

[Speedy2k]

Does someone have some experience with Aastra SIP-DECT technologies ? I have 2 RFP 32 antenna and 2 DECT 142 phones, i am tryning to start with only one antenna to get the hang of it, but i can't get it to work, i have downloaded the latest OMM from Aastra (1.8.5) i have used OpenMobility Configurator 1.8.5 to send to the RFP 32 the good IP,DNS,NETMASK,TFTPSERVER,FILE,COUNTRY,ROUTER,OMM IP. I have added 1 phone IPEI to the protable parts menu with all SIP config, the registration is started, i have added the PARK key i have bought with the OMM activation kit. but it doesn't seems to start the radio, even if i put the phone in site survey mode, it doesn't see the antenna. IS there something i am missing ? By the way this i a hosted setup and the PBX is live on the net for now.

 

[atsak]

Does someone have some experience with Aastra SIP-DECT technologies ? I have 2 RFP 32 antenna and 2 DECT 142 phones, i am tryning to start with only one antenna to get the hang of it, but i can't get it to work, i have downloaded the latest OMM from Aastra (1.8.5) i have used OpenMobility Configurator 1.8.5 to send to the RFP 32 the good IP,DNS,NETMASK,TFTPSERVER,FILE,COUNTRY,ROUTER,OMM IP. I have added 1 phone IPEI to the protable parts menu with all SIP config, the registration is started, i have added the PARK key i have bought with the OMM activation kit. but it doesn't seems to start the radio, even if i put the phone in site survey mode, it doesn't see the antenna. IS there something i am missing ? By the way this i a hosted setup and the PBX is live on the net for now.

I set one of these up a couple months ago; it was painless for me. Do you have the current firmware stored on the t*f*t*p server? Is the green light on on the RFP32?

You have to wait about 3 minutes after it boots before trying to associate a phone with it; that was the only odd thing I found. On the phone did you input the code shown on the registration screen?

 

[Speedy2k]

I would like to make my dhcp server autoprovision all the setting it need. I use pfsense on this install, do you know all the DHCP option i should use ?? thanx!

 

[atsak]

I would like to make my dhcp server autoprovision all the setting it need. I use pfsense on this install, do you know all the DHCP option i should use ?? thanx!

66 and 150 usually is what I set.

 

[Speedy2k]

No those antenna need the boot server, file name to download, and some other mandatory setting that i can't seems to get working. here are a list from the admin guide:

Option / Champ | Définition | Obligatoire
yiaddr | Adresse IP du IP-RFP | oui
siaddr | Paramètre appelé Nom d'Hôte Serveur de Boot possédant une valeur identique à l'adresse IP du serveur t*f*t*p | oui
file | Paramètre appelé Nom Bootfile possédant la valeur du chemin (optionnel) et le nom de l'image d'application. Par exemple omm_ffsip.t*f*t*p. | oui
code 3 | Passerelle par Défaut | oui
code 43 | Options Spécifiques au Fournisseur | oui
public option 224 | Paramètre appelé magic_str doit être fixée à la valeur "OpenMobility". | oui

Option Spécifique au Fournisseur | Définition | Longueur | Obligatoire
option 10 | ommip1: Utilisé pour sélectionner le IPRFP où devrait résider le OpenMobility Manager (OMM) | 4 | oui

They are the requiered dhcp parameter i must sent to the RFP32. But how to correctly set them in the pfSense DHCP server ?