chan_sccp daemon not running?

[w1ve]

You guys may has seen my thread on the CP7920 I picked up on ebay.. I finally got the configuration software, and got the phone setup...

Now the trouble I'm having is on the PIAF side. I setup the t*f*t*p server, and put the cisco configuration files there. All well and good. The phone sees the t*f*t*p, and reads the config files, but, it never connects to the sccp daemon on port 2000.

Not being a linux dude, the only way I know to test if a TCP daemon is up is to telnet to it and see if it connects... and it does not on either 127.0.0.1 or my public IP on port 2000...

I know sccp is loaded into asterisk... when I question the version command I get back:

SCCP channel version: 20071213

I lost as to why the daemon is not running.

Thoughts?

 

[wardmundy]

Disable the firewall momentarily and see if that fixes it. If so, we can work out the line to add to the config.

disable-iptables

enable-iptables <-- don't forget this one after the test

 

[w1ve]

iptables makes no difference...

I don't think the daemon is running... how can I tell?

 

[w1ve]

iptables makes no difference...

I don't think the daemon is running... how can I tell?

(sccp daemon that is)