euser4life
Guru
- Joined
- Dec 18, 2007
- Messages
- 223
- Reaction score
- 0
Echo on Local calls with PRI (RESOLVED)
Hi Guys I've got an install that is having problems with local calls. The person in the office will call a local number and they can hear themselves echo back. Next they can call a long distance number and the call is crystal clear.
Before we were having issues with the POTS lines so we switched to a PRI but now with local calls sounding this way we don't seem to be much better off.
We are using a Rhino PCI express (r1t1-ec) with hardware echo cancellation. I've been on the phone with Rhino, but they did not have much to offer. Would I be better off dropping rhino and getting a sangoma pri card? We used Rhino on our other installs but this is a first as far as PRI issues go.
Everything looks good from dahdi_test, no interrupt issues, etc... I've tried reducing my tx gain down but it doesn't seem to be taking. Looking for anyone that has experienced these symptoms with local calls and a PRI
I've also reached out to the CLEC but get the typical "Everything looks good on our side"
Using Asterisk 1.4.39.2 and Dahdi 2.4.0
Hi Guys I've got an install that is having problems with local calls. The person in the office will call a local number and they can hear themselves echo back. Next they can call a long distance number and the call is crystal clear.
Before we were having issues with the POTS lines so we switched to a PRI but now with local calls sounding this way we don't seem to be much better off.
We are using a Rhino PCI express (r1t1-ec) with hardware echo cancellation. I've been on the phone with Rhino, but they did not have much to offer. Would I be better off dropping rhino and getting a sangoma pri card? We used Rhino on our other installs but this is a first as far as PRI issues go.
Everything looks good from dahdi_test, no interrupt issues, etc... I've tried reducing my tx gain down but it doesn't seem to be taking. Looking for anyone that has experienced these symptoms with local calls and a PRI
I've also reached out to the CLEC but get the typical "Everything looks good on our side"
Using Asterisk 1.4.39.2 and Dahdi 2.4.0
