TIPS hylafax is down

[rick]

Newly installed Debian10 on proxmox. Have modified the hosts.hfaxd with localhosts 127.0.0.1 to no avail.


Incredible PBX 2021.01 for Debian 10.13 Buster

Asterisk: UP Apache/5.6: UP MySQL: UP
SendMail: UP IPtables: UP SSH: UP
LAN port: UP Fail2Ban: UP Webmin: UP
UCP Dmon: UP PortKnock: UP NR VPN: UP
FaxGetty: UP IAX Modem: UP HylaFax: DN

RAM:93920 *Debian 10 buster* Disk:3.5G

Asterisk 18.13.0 Incredible GUI 15.0.22.23

LAN:

Public:

System Time: Wed Dec 21 16:52:39 CST 2022



< OK >

 

[Eliad]

Newly installed Debian10 on proxmox. Have modified the hosts.hfaxd with localhosts 127.0.0.1 to no avail.


Incredible PBX 2021.01 for Debian 10.13 Buster

Asterisk: UP Apache/5.6: UP MySQL: UP
SendMail: UP IPtables: UP SSH: UP
LAN port: UP Fail2Ban: UP Webmin: UP
UCP Dmon: UP PortKnock: UP NR VPN: UP
FaxGetty: UP IAX Modem: UP HylaFax: DN

RAM:93920 *Debian 10 buster* Disk:3.5G

Asterisk 18.13.0 Incredible GUI 15.0.22.23

LAN:

Public:

System Time: Wed Dec 21 16:52:39 CST 2022

There is also a script that you have to run in order to have the fax installed, i am not sure you did run that or not from the information you are providing

 

[rick]

What I have found is the Debian install under proxmox works as a virtual machine but not as a container.

 

[Eliad]

What I have found is the Debian install under proxmox works as a virtual machine but not as a container.

Same for me too. The installer works correctly in a VM Proxmox. I tried few time to install in a CT and doesnt work correctly. I dont know enough to figure out why

 

[wardmundy]

If you've already messed with the default HylaFax setup, the install script probably won't work. Otherwise...

If you want to send and receive faxes with Incredible PBX 2021, run the following script while logged into your server as root: /root/incrediblefax2020-debian10.sh. When prompted, accept all the defaults. Once the HylaFax and AvantFax components are installed, reboot your server. To send faxes, click on the AvantFax tab in the FreePBX GUI and enter your login credentials (default: admin/password). To receive incoming faxes once you have configured a trunk and DID for your PBX, login to the FreePBX GUI as admin. Navigate to Connectivity -> Inbound Routes. For each of your DIDs on which you wish to receive faxes, select the inbound route and click the Fax tab. Review the Default Inbound Route Fax settings for proper setup.

NOTE: If you get a database error when you attempt to access AvantFax from a web browser, log into your server as root and reinstall the AvantFax database: ./avantfax-db-replace.