GOOD NEWS iPBX 2026 Queue Callback beta2

[Joe Diamond CPA]

ahhhhhhhhhhhh i did not refresh, stand by.........................................

 

[KNERD]

I had also goofed by making the module a .tar.gz instead of a .tgz so it should be a tgz file now instead of the other type

 

[Joe Diamond CPA]

got same error.................
Whoops \ Exception \ ErrorException (E_COMPILE_ERROR)
Namespace declaration statement has to be the very first statement or after any declare call in the scriptCOPY
Stack frames (3)
2
Whoops\Exception\ErrorException
/var/www/html/admin/modules/qcallback/Qcallback.class.php24
1
Whoops\Run handleError
…/vendor/filp/whoops/src/Whoops/Run.php510
0
Whoops\Run handleShutdown
[internal]0

 

[KNERD]

Did you download a .tgz file or a .tar.gz?

 

[Joe Diamond CPA]

the "source code zip file" incredible needs a zip file in the module uploads, correct?

 

[Joe Diamond CPA]

OK i was successful, i uploaded in IPBX the non zip .tgz, ill test today!!!!!!!!!!!!!!
thank you for all of your wonderful hard work! i love incredible PBx and really the only thing missing was the queue call back module!!!!!!!!!!!!!!!!!! GOD BLESS

 

[KNERD]

no. You should be downloading the .tgz file.

Here is the direct link

https://github.com/tcreek/queue_callback_v17/releases/download/17.0.2-beta2/qcallback-17.0.2-beta.tgz

Also, for some reason, despite erasing the old release, it kept the old .zip and the other file

 

[Joe Diamond CPA]

All good now, ill test and get back to you by tomorrow! YOU A GENIUS KNERD!!!!!!!!!!!!!!!!!!!!!

 

[wardmundy]

Now available on pCloud as well:

cd /var/www/html/admin/modules
mkdir qcallback
chown asterisk:asterisk qcallback
chmod 775 qcallback
cd qcallback
wget https://filedn.com/lBgbGypMOdDm8PWOoOiBR7j/IncrediblePBX2026/CONTRIBUTORS/qcallback-17.0.2.1-beta.tgz
tar zxvf qcallback-17.0.2.1-beta.tgz
cd agi-bin
cp -p * /var/lib/asterisk/agi-bin/.
fwconsole ma install qcallback
/root/sig-fix
/root/sig-fix
fwconsole reload

 

[Joe Diamond CPA]

thanks ward, ill experiment tomorrow, VERY EXCITING!

 

[KNERD]

New update

Release v17.0.2.1Beta2 · tcreek/queue_callback_v17

Fixed typos in AGI files which was causing them to not execute. Full Changelog: 17.0.2-beta2...v17.0.2.1Beta2

github.com

 

[wardmundy]

Updated install steps above. Thanks.

 

[wardmundy]

Just a heads up to be alert for malicious callback scams. If a caller spoofs their number or enters a new callback number and either of those is in an area code with very expensive calling rates, you could rack up an enormous phone bill without careful monitoring or blocking of certain area codes in your dialplan.

These international area codes blend into the standard 10-digit format used in North America, but calling them back incurs international toll charges:

• 268: Antigua and Barbuda
• 284: British Virgin Islands
• 345: Cayman Islands
• 473: Grenada, Carriacou, and Petite Martinique
• 649: Turks and Caicos Islands
• 664: Montserrat
• 721: Sint Maarten
• 758: Saint Lucia
• 767: Commonwealth of Dominica
• 784: Saint Vincent and the Grenadines
• 809, 829, 849: Dominican Republic
• 868: Trinidad and Tobago
• 869: Saint Kitts and Nevis
• 876: Jamaica

 

[KNERD]

Just a heads up to be alert for malicious callback scams. If a caller spoofs their number or enters a new callback number and either of those is in an area code with very expensive calling rates, you could rack up an enormous phone bill without careful monitoring or blocking of certain area codes in your dialplan.

I guess they would have to resolve that with Outbound Routes to make sure those are not included. But at this point, still in beta so best not to use it in production yet

 

[KNERD]

Just a heads up to be alert for malicious callback scams. If a caller spoofs their number or enters a new callback number and either of those is in an area code with very expensive calling rates, you could rack up an enormous phone bill without careful monitoring or blocking of certain area codes in your dialplan.

These international area codes blend into the standard 10-digit format used in North America, but calling them back incurs international toll charges:

• 268: Antigua and Barbuda
• 284: British Virgin Islands
• 345: Cayman Islands
• 473: Grenada, Carriacou, and Petite Martinique
• 649: Turks and Caicos Islands
• 664: Montserrat
• 721: Sint Maarten
• 758: Saint Lucia
• 767: Commonwealth of Dominica
• 784: Saint Vincent and the Grenadines
• 809, 829, 849: Dominican Republic
• 868: Trinidad and Tobago
• 869: Saint Kitts and Nevis
• 876: Jamaica

Seems a good way to block those is to put make a dummy custom trunk and an outbound route with those area codes directing the outbound route to the dummy trunk.

 

[wardmundy]

The simplest solution to block all these calls is to add and save the following code immediately below [from-internal-custom] at the top of /etc/asterisk/extensions_custom.conf and then issue command: asterisk -rx "dialplan reload"

; Block international Caribbean/High-risk NANP calls
 exten => _NXXNXXXXXX,1,NoOp(Checking Dialed Number against Blocklist)
 exten => _268NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _284NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _345NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _473NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _649NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _664NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _721NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _758NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _767NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _784NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _809NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _829NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _849NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _868NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _869NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _876NXXXXXX,2,Goto(app-blackhole,hangup,1)

 exten => _1NXXNXXXXXX,1,NoOp(Checking Dialed Number against Blocklist)
 exten => _1268NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1284NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1345NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1473NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1649NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1664NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1721NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1758NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1767NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1784NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1809NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1829NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1849NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1868NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1869NXXXXXX,2,Goto(app-blackhole,hangup,1)
 exten => _1876NXXXXXX,2,Goto(app-blackhole,hangup,1)

 

[KNERD]

Maybe I can add that later as an a checkbox option to add and/or remove those from extension_custom.conf as "Block Expensive Caribbean area codes"?

 

[wardmundy]

I'm wondering if we shouldn't always block these area codes unless someone opts out because of the Ring-Once scams where malicious callers ring your phone once and hang up knowing most idiots will immediately return the calls.

 

[KNERD]

Thinking about it more....what if someone has legit business in one of those area codes. Perhaps make a tab with blocked area codes with all of the Caribbean blocked when the module is installed. Then they can manually remove one or more with the possibility of adding more to the list including international.

For now I am waiting on Feedback from Joe and from anyone else interested in testing it at this point.

 

[Joe Diamond CPA]

im testing now.......................