FYI iPBX 2026 Queue Callback

[Joe Diamond CPA]

Hi everyone, successfully installed the TCREEK (git hub) queue callback v17! download the ZIP folder, go to module upload in IPBX and install! the module will appear, Ill let you know how it goes.
if you get an retrieve_conf failed to sym link: /var/lib/asterisk/sounds/en/custom from qcallback/sounds (Already exists, not a link) Do this........................mv /var/lib/asterisk/sounds/en/custom /var/lib/asterisk/sounds/en/custom.bak...............................then................ fwconsole reload...............then..............ls -l /var/lib/asterisk/sounds/en/, the warninng on the dashboard should go away.

 

[wardmundy]

GitHub - tcreek/queue_callback_v17: Adds callback functionality to a Queue in FreePBX Queues

Adds callback functionality to a Queue in FreePBX Queues - tcreek/queue_callback_v17

github.com

To INSTALL:

cd /var/www/html/admin/modules
wget https://filedn.com/lBgbGypMOdDm8PWOoOiBR7j/IncrediblePBX2026/qcallback.tar.gz
tar zxvf qcallback.tar.gz
fwconsole ma install qcallback
/root/sig-fix
/root/sig-fix
fwconsole reload

Skip to step 1 below...

 

[wardmundy]

Installation continues in FreePBX GUI as admin​

1. Open Applications → Queue Callback to configure your queues and options.
2. Enable the processor (scheduled execution) in the module UI.
   (If you prefer manual scheduling, you can add a cron entry for the asterisk user to run the included intelligent_callback_processor.php every minute.)

 

[wardmundy]

I cleaned this up so it installs without errors. See above changes.

 

[KNERD]

Been a while since I worked on this. I guess I should continue on it

 

[kenn10]

I still get this after installing:

retrieve_conf failed to sym link:
   /var/lib/asterisk/sounds/en/custom from qcallback/sounds (Already exists, not a link)
This can result in FATAL failures to your PBX. If the target file exists and not identical, the symlink will not occur and you should rename the target file to allow the automatic sym link to occur and remove this error, unless this is an intentional customization.

 

[kenn10]

Doing the sound files move detailed by @Joe Diamond CPA clears the error.