SOLVED New Server IP Address

[cporantes]

My Host changed servers and IPs for my PBX. I changed the IP of my Trunk Group in BulkVS, and I changed the NAT settings in IPBX to the new IP address.
But now my outbound phone calls hang up in 30 to 40 seconds after connection.

I don't know why. Any ideas?

Do I need to change the IP tables?

 

[wardmundy]

Be sure your Settings -> Asterisk SIP Settings -> NAT Settings are all correct. Then add the new public IP address to the firewall using add-ip and choose the 0 option.

 

[cporantes]

Be sure your Settings -> Asterisk SIP Settings -> NAT Settings are all correct. Then add the new public IP address to the firewall using add-ip and choose the 0 option.

I must be dumb as a box of rocks. I cannot figure out the format for ./add-ip.
Should it be ./add-ip xx.xx.xx.xx/0

 

[wardmundy]

./add-ip mynewserver xx.xx.xx.xx
At the prompt, type 0

 

[cporantes]

./add-ip mynewserver xx.xx.xx.xx
At the prompt, type 0

Okay, I did that, it works now... Thanks Ward.