Problem after reboot, outbound route

[timg]

Running latest PBX in a Flash with POTS lines only, Sangoma card, asterisk 1.4.

Every time I reboot my server, I get an all circuits are busy message when I try to dial out on my Aastra 57i phones. I only have one outbound route set up like this:

Name: Everything
Dial Patterns: 1NXXNXXXXXX
NXXXXXX

Trunk Sequence: 0 ZAP/g0

Everything else is left at default.

If I delete and re-add this route, my phones start working again. This happens every time I reboot my server.

 

[jmullinix]

Can you post your zapata.conf file, zapata-auto.conf and zapata-channels.conf for us?

 

[timg]

zapata.conf

;autogenerated by /usr/local/sbin/config-zaptel do not hand edit
;Zaptel Channels Configurations (zapata.conf)
;
;For detailed zapata options, view /etc/asterisk/zapata.conf.orig

[trunkgroups]

[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=6.0
txgain=4.0
group=1
callgroup=1
pickupgroup=1

immediate=no

;Sangoma A200 [slot:8 bus:1 span:1] <wanpipe1>
context=from-internal
group=1
signalling = fxo_ks
channel => 3

context=from-internal
group=1
signalling = fxo_ks
channel => 4

context=from-zaptel
group=0
signalling = fxs_ks
channel => 5

context=from-zaptel
group=0
signalling = fxs_ks
channel => 6

context=from-zaptel
group=0
signalling = fxs_ks
channel => 7

context=from-zaptel
group=0
signalling = fxs_ks
channel => 8

==============================

zapata-auto.conf

; Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;
callerid=asreceived
================================

zapata-channels.conf

; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;

; Span 1: WRTDM/0 "wrtdm Board 1" (MASTER)
;;; line="3 WRTDM/0/2 FXOKS (In use)"
signalling=fxo_ks
callerid="Channel 3" <6003>
mailbox=6003
group=5
context=from-internal
channel => 3
callerid=
mailbox=
group=
context=default

;;; line="4 WRTDM/0/3 FXOKS (In use)"
signalling=fxo_ks
callerid="Channel 4" <6004>
mailbox=6004
group=5
context=from-internal
channel => 4
callerid=
mailbox=
group=
context=default

;;; line="5 WRTDM/0/4 FXSKS (In use)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 5
context=default

;;; line="6 WRTDM/0/5 FXSKS (In use)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 6
context=default

;;; line="7 WRTDM/0/6 FXSKS (In use)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 7
context=default

;;; line="8 WRTDM/0/7 FXSKS (In use)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 8
context=default

 

[jmullinix]

OK THis looks normal for a Sangoma card. Sangoma puts it all in zapata.conf and ignores zapata-auto and zapata-channels.

Could you provide the CLI output during a failed call?

 

[timg]

Appreciate the help John. I will post the output later this evening. Can't take the phones down right now.

 

[timg]

Sorry it took so long..but here it is... happened again today when I rebooted my box.

-- Executing [15019080000@from-internal:1] Macro("SIP/212-0a1142b8", "user-callerid|SKIPTTL|") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/212-0a1142b8", "AMPUSER=212") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/212-0a1142b8", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/212-0a1142b8", "1|Set|REALCALLERIDNUM=212") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/212-0a1142b8", "AMPUSER=212") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/212-0a1142b8", "AMPUSERCIDNAME=Tim Grooms") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/212-0a1142b8", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/212-0a1142b8", "AMPUSERCID=212") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/212-0a1142b8", "CALLERID(all)="Tim Grooms" <212>") in new stack
-- Executing [s@macro-user-callerid:9] Set("SIP/212-0a1142b8", "REALCALLERIDNUM=212") in new stack
-- Executing [s@macro-user-callerid:10] ExecIf("SIP/212-0a1142b8", "0|Set|CHANNEL(language)=") in new stack
-- Executing [s@macro-user-callerid:11] GotoIf("SIP/212-0a1142b8", "1?continue") in new stack
-- Goto (macro-user-callerid,s,20)
-- Executing [s@macro-user-callerid:20] NoOp("SIP/212-0a1142b8", "Using CallerID "Tim Grooms" <212>") in new stack
-- Executing [15019080000@from-internal:2] Set("SIP/212-0a1142b8", "_NODEST=") in new stack
-- Executing [15019080000@from-internal:3] Macro("SIP/212-0a1142b8", "record-enable|212|OUT|") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/212-0a1142b8", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("SIP/212-0a1142b8", "recordingcheck|20090330-131951|1238437191.4") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20090330-131951|1238437191.4: Outbound recording not enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] MacroExit("SIP/212-0a1142b8", "") in new stack
-- Executing [15019080000@from-internal:4] Macro("SIP/212-0a1142b8", "dialout-trunk|1|15019080000||") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/212-0a1142b8", "DIAL_TRUNK=1") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/212-0a1142b8", "0?sub-pincheck|s|1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/212-0a1142b8", "0?disabletrunk|1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/212-0a1142b8", "DIAL_NUMBER=15019080000") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/212-0a1142b8", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/212-0a1142b8", "OUTBOUND_GROUP=OUT_1") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/212-0a1142b8", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,9)
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/212-0a1142b8", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/212-0a1142b8", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/212-0a1142b8", "outbound-callerid|1") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/212-0a1142b8", "0|SetCallerPres|") in new stack
-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/212-0a1142b8", "0|Set|REALCALLERIDNUM=212") in new stack
-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/212-0a1142b8", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/212-0a1142b8", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/212-0a1142b8", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/212-0a1142b8", "TRUNKOUTCID=5017230000") in new stack
-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/212-0a1142b8", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/212-0a1142b8", "1|Set|CALLERID(all)=5017230000") in new stack
-- Executing [s@macro-outbound-callerid:13] GotoIf("SIP/212-0a1142b8", "1?exit") in new stack
-- Goto (macro-outbound-callerid,s,11)
-- Executing [s@macro-outbound-callerid:11] MacroExit("SIP/212-0a1142b8", "") in new stack
-- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/212-0a1142b8", "0|AGI|fixlocalprefix") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/212-0a1142b8", "OUTNUM=w15019080000") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/212-0a1142b8", "custom=ZAP/g0") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/212-0a1142b8", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/212-0a1142b8", "dialout-trunk-predial-hook|") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/212-0a1142b8", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/212-0a1142b8", "0?bypass|1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/212-0a1142b8", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:19] Dial("SIP/212-0a1142b8", "ZAP/g0/w15019080000|300|") in new stack
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing [s@macro-dialout-trunk:20] Goto("SIP/212-0a1142b8", "s-CONGESTION|1") in new stack
-- Goto (macro-dialout-trunk,s-CONGESTION,1)
-- Executing [s-CONGESTION@macro-dialout-trunk:1] GotoIf("SIP/212-0a1142b8", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CONGESTION,3)
-- Executing [s-CONGESTION@macro-dialout-trunk:3] NoOp("SIP/212-0a1142b8", "TRUNK Dial failed due to CONGESTION - failing through to other trunks") in new stack
-- Executing [15019080000@from-internal:5] Macro("SIP/212-0a1142b8", "outisbusy|") in new stack
-- Executing [s@macro-outisbusy:1] Playback("SIP/212-0a1142b8", "all-circuits-busy-now|noanswer") in new stack
-- <SIP/212-0a1142b8> Playing 'all-circuits-busy-now' (language 'en')
-- Executing [s@macro-outisbusy:2] Playback("SIP/212-0a1142b8", "pls-try-call-later|noanswer") in new stack
-- <SIP/212-0a1142b8> Playing 'pls-try-call-later' (language 'en')
== Spawn extension (macro-outisbusy, s, 2) exited non-zero on 'SIP/212-0a1142b8' in macro 'outisbusy'
== Spawn extension (macro-outisbusy, s, 2) exited non-zero on 'SIP/212-0a1142b8'