SOLVED Problem setting up new IP addresses from Skyetel

[DavidKeeney]

I am missing inbound calls, caller hears "number is not in service...". If they redial it usually connects. Inspecting the logs I see it is rejecting an unknown caller and the call is coming from one of Skyetel's new IP addresses.

This is an incredible PBX 2020 instance (Incredible PBX 15.0.17.64) running on a raspberry pi 4b. This worked great until Skyetel added new IP addresses. Skyetel support says to run the script referenced in http://nerdvittles.com/introducing-skyetel-a-voip-provider-for-all-seasons/ to configure the trunks but this script is out-of-date. So, is there an updated version of this script that includes all of the IP addresses?

In the Skyetel help files there are excellent articles describing how to configure the incoming and outgoing trunks for use with Skyetel. It says this is for FreePBX 15, however the screenshots did not seem to match with my version. Specifically there was no "Match (Permit)" field in which to enter the list of IP addresses. Am I missing something?

Do I need to upgrade to the 2021 version on my raspberry pi?
https://nerdvittles.com/moving-from-incredible-pbx-2020-to-2021-on-the-raspberry-pi/

I noticed that a new 2021 version image was not available in PBXinaFlash.3 downloads for the raspberry pi. Is there some reason that it might not work for the raspberry pi? I would rather not use a beta version for my production system.

 

[kenn10]

The match/permit field is for PJSIP, not chan_sip. PJSIP lets you have just one trunk for Skyetel that sends and receives on all of the IP addresses. I see you are a brand new forum member so do some research here and on Nerd Vittles to get a better picture of whats going on. I don't use the Pi but there are others on the forum who do. It has some quirks they can probably help you with to get it up to IncrediblePBX2021.

Also see this article on the forum: https://www.voip-info.org/forum/threads/upgrade-raspi-to-incredible-pbx-2021.25683/

 

[DavidKeeney]

Yes, I see now. I deleted the predefined trunks and added new pjsip ones and there it is.
Thanks.

 

[kenn10]

Glad you figured it out.