I followed the instructions to install incredible pbx on my pogoplug and whenever you reboot the system from ssh it gets stuck in a boot loop. (the led just flashes green then eventually red then starts over) Only way to get it running again is to pull the power and replug. How would I fix this?
Another Problem I'm having is the re-size script only works on a sd card. I installed the image to a usb stick and would like to use the full capacity. How would I do that?
Lastly I updated all of the installed modules and now asterix refuses to start. Is running outdated modules the only way to run this?
If using a usb stick is the cause of all 3 problems and not just the 2nd I'll have to wait to buy one as money is pretty tight at the moment.
I almost forgot to mention that I didn't do the steps to get my pogo to boot the original os when no media is inserted and following the post reboot instructions for setting that up have failed.
If you need any further information I'll post it soon as I'm able.
Another Problem I'm having is the re-size script only works on a sd card. I installed the image to a usb stick and would like to use the full capacity. How would I do that?
Lastly I updated all of the installed modules and now asterix refuses to start. Is running outdated modules the only way to run this?
If using a usb stick is the cause of all 3 problems and not just the 2nd I'll have to wait to buy one as money is pretty tight at the moment.
I almost forgot to mention that I didn't do the steps to get my pogo to boot the original os when no media is inserted and following the post reboot instructions for setting that up have failed.
If you need any further information I'll post it soon as I'm able.
Phone System 