SOLVED Problems with IncredibePBX 2021 Debian on premise

[Alessandro.DArpini]

Hi!
On DigitalOcean no problem at all but on premise... I'm unable to get IncrediblePBX up. The follow is the story:
I have downloaded debian-10.8.0-amd64-netinst.iso and I installed a base system on my Intel I7 computer. I resized my console window to 82 x 30 and I log to the target machine via SSH as root. Then wget http://incrediblepbx.com/IncrediblePBX2021.sh and started the installation. During the installation, when asked to declare my Country Code (39 for Italy) I was not allowed to confirm my choice nor by pressing the space bar or the Enter key, nor the Tab key allowed me to choose the confirmation button <OK> therefore CTRL+C to continue.. At the end I performed a reboot but I was not able to access the FreePBX GUI because an unrecoverable error from Apache.
I did several times the same procedure and I had not chance to avoid to bother you for a friendly help.
I'm stuck.
Thank you for your time.

 

[wardmundy]

Do not run the install from your server console. Log in from a desktop PC using SSH. Then run the install script. If you upgrade Debian, reboot before running the install script. Just sit tight during the country code prompt. It will proceed without your doing anything. Your country code won't matter.

 

[Alessandro.DArpini]

Do not run the install from your server console. Log in from a desktop PC using SSH. Then run the install script. If you upgrade Debian, reboot before running the install script. Just sit tight during the country code prompt. It will proceed without your doing anything. Your country code won't matter.

I was in bad when I saw your kindly reply and now I'm back to my Linux Box. You are true because after a while, the installation goes ahead automatically without the need to do anything at the Country Code prompt.
At 04:22 A.M. the problem is solved and I have my PBX up and running. Thank you very much, Ward Mundi! Thank you very much!