SOLVED Skytel do not Qualify

[Hometech]

Hi, I am seeing this in my logs. I can not ping their addresses either. They were working when I originally set them up. Has something changed?

Peer 'Skyetel-NW' is now UNREACHABLE! Last qualify: 0
[2020-04-15 20:03:44] NOTICE[1738] chan_sip.c: Peer 'Skyetel-NE' is now UNREACHABLE! Last qualify: 0
[2020-04-15 20:03:44] NOTICE[1738] chan_sip.c: Peer 'Skyetel-SE' is now UNREACHABLE! Last qualify: 0
[2020-04-15 20:03:44] NOTICE[1738] chan_sip.c: Peer 'Skyetel-SW' is now UNREACHABLE! Last qualify: 0
[2020-04-15 20:03:45] NOTICE[1738] chan_sip.c: Peer 'Skyetel-1' is now UNREACHABLE! Last qualify: 0

 

[krzykat]

Only EU = unreachable for me:


Skyetel-EU 35.156.192.164 Yes Yes 5060 UNREACHABLE
Skyetel-NE 52.60.138.31 Yes Yes 5060 OK (39 ms)
Skyetel-NW 52.41.52.34 Yes Yes 5060 OK (76 ms)
Skyetel-SE 50.17.48.216 Yes Yes 5060 OK (25 ms)
Skyetel-SW 52.8.201.128 Yes Yes 5060 OK (73 ms)
Skyetel-Term 52.8.201.128 Yes Yes 5060 OK (73 ms)

 

[kenn10]

Working for me. Sounds like you perhaps have a firewall issue or there is an upstream issue between your ISP and Skyetel.

 

[atsak]

How often are you qualifying the connection? Make it more than 120 seconds. Many carriers have anti-DDoS provisions that will block you if you send to many qualification requests.

 

[Hometech]

OOPS I found My Home IP updated first time since I setup Skytel dont know why it did auto update to skyetel? I will have to go over Ward's set up instructions to see why its not updating on me Skyetel dash board Endpoint groups?

 

[Hometech]

Reran the script created a new API and all is well I must have incorrectly setup the script originally.