kenn10
Well-Known Member
- Joined
- Dec 16, 2007
- Messages
- 4,760
- Reaction score
- 3,145
Sounds like a contractor botched a router upgrade to me which resulted in a flood due to improper routing. I don't buy that a digital copper line vs. fiberoptic really has anything to do with the issue. Sounds like scare tactics to get the necessary funding. I don't disagree that the funding is needed to finally upgrade the ancient FAA equipment.

According to the FAA and Transportation Secretary Sean Duffy:
- Legacy equipment became unstable when the FAA FTI network was flooded with data at a rate of about 1,000 connection attempts every 4–5 seconds. This disrupted aircraft communications and radar feeds.
- Initial investigation pointed to two sites: a radio communications site in El Dorado, Arkansas, and a radar site in Amarillo, Texas. L3Harris (the FAA’s network service provider) was performing work at the El Dorado site that included deploying a new router as part of the ongoing, routine conversion of outdated copper-wire lines to fiber optics.
- L3Harris blocked the affected locations, the network stabilized, and the ground stop was lifted. Officials are still determining the precise fault—whether installer/user error by L3Harris or a defective router. The broader context is the age and limitations of the legacy TDM/copper-based systems.

Last edited: