2 cisco phones same IP - what can I do?

[Markman1]

I just purchased a second Cisco SPA 504g phone for my home office PIAF. both phones are located in another location (same) with 1 IP. Set up the 2nd extension in PIAF. checked everything but it won't register to Asterisk. Can I run 2 endpoints on 1 public IP with the same Asterisk server?

Any help will be greatly appreciated

 

[rossiv]

Can I run 2 endpoints on 1 public IP with the same Asterisk server?

There should be no problem with that. It would be helpful if you posted the output of 'status' on your server, here.
Also, some Asterisk logs would be great.

 

[Markman1]

Maybe I was too vague. I have an Asterisk server at my location. At a remote location I currently have 1 remote phone. I need to add a second at that location. So, [FONT='Calibri','sans-serif']those 2 endpoints need to register to an external Asterisk server using the same IP address. Hope that helps explain my problem better.[/FONT]

 

[rossiv]

Maybe I was too vague. I have an Asterisk server at my location. At a remote location I currently have 1 remote phone. I need to add a second at that location. So, [FONT='Calibri','sans-serif']those 2 endpoints need to register to an external Asterisk server using the same IP address. Hope that helps explain my problem better.[/FONT]

My questions still remain. Please provide that information. Yes, you should be able to register as many as your remote router can handle to your Asterisk server.

 

[tm1000]

As rossiv already said it will work fine.

 

[Markman1]

Output status and Logs?

Can you tell me how to get the output of 'status' on your server and which Asterisk logs and where to get those?

Thanks again for your help here.

 

[blanchae]

Go to this thread that discusses the info that is needed to help you.