aaaaaahhhhhhhh Help Dahdi gone mad….

[womble1]

root@tel:~ $ dahdi_cfg -vvv
DAHDI Tools Version - 2.5.0.1

DAHDI Version: 2.5.0.1
Echo Canceller(s): HWEC
Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)

1 channels to configure.

DAHDI_CHANCONFIG failed on channel 1: Invalid argument (22)
Selected signaling not supported
Possible causes:
FXS signaling is being used on a FXS interface (use a FXO signaling variant)
RBS signaling is being used on a E1 CCS span
Signaling is being assigned to channel 16 of an E1 CAS span
root@tel:~ $


also……


dahdi_genconf
Empty configuration -- no spans
Empty configuration -- no spans
PBX in a Flash PURPLE Status
──────────────────────────────────────────────────────────────────────────────
┌────────────────────────System Information───────────────────────────┐
│ Asterisk = ONLINE | Dahdi = ONLINE | MySQL = ONLINE │
│ SSH = ONLINE | Apache = ONLINE | Iptables = ONLINE │
│ Fail2ban = ONLINE | Internet = ONLINE | Ip6Tables = ONLINE │
│ BlueTooth = ONLINE | Hidd = ONLINE | NTPD = ONLINE │
│ Postfix = ONLINE | Samba = OFFLINE | Webmin = ONLINE │
│ Ethernet0 = ONLINE | Ethernet1 = N/A | Wlan0 = N/A │
│ │
│ PBX in a Flash Version = 1.7.5.5 Running on *HARDWARE* │
│ FreePBX Version = 2.9.0.9 │
│ Running Asterisk Version = 1.8.6.0 │
│ Asterisk Source Version = 1.8.6.0 │
│ Dahdi Source Version = 2.5.0.1+2.5.0.1 │
│ Libpri Source Version = 1.4.12 │
│ IP Address = 192.168.1.150 on eth0 │
│ Operating System = CentOS release 5.5 (Final) │
│ Kernel Version = 2.6.18-194.8.1.el5 - 32 Bit │
│

 

[womble1]

Having restarted the machine and force an FSCK

I now get

root@tel:~ $ dahdi_cfg -vvv
DAHDI Tools Version - 2.5.0.1

DAHDI Version: 2.5.0.1
Echo Canceller(s): HWEC
Configuration
======================


Channel map:


0 channels to configure.

root@tel:~ $

and……


dahdi_genconf
Empty configuration -- no spans
Empty configuration -- no spans
PBX in a Flash PURPLE Status

 

[briankelly63]

Perhaps recheck using these steps...

http://pbxinaflash.com/community/th...ard-using-dahdi-on-piaf-purple.11214/?t=11214

 

[womble1]

hmmm followed that…

root@tel:~ $ dahdi_genconf –v
Illegal name '–v'
root@tel:~ $ dahdi_cfg –v
root@tel:~ $ cp /var/www/html/admin/modules/dahdiconfig/etc/chan_dahdi.conf /etc/asterisk/chan_dahdi.conf.hold
root@tel:~ $ mv /etc/asterisk/chan_dahdi.conf.hold /etc/asterisk/chan_dahdi.conf
root@tel:~ $ dahdi_scan
root@tel:~ $ dahdi_cfg
root@tel:~ $ dahdi_cfg -v
DAHDI Tools Version - 2.5.0.1

DAHDI Version: 2.5.0.1
Echo Canceller(s): HWEC
Configuration
======================


0 channels to configure.

root@tel:~ $

did genconf again with verbose logging…

root@tel:~ $ /usr/sbin/dahdi_genconf -vvv
Default parameters from /etc/dahdi/genconf_parameters
Empty configuration -- no spans
Generating /etc/dahdi/system.conf
Empty configuration -- no spans
Generating /etc/asterisk/dahdi-channels.conf
root@tel:~ $

 

[blanchae]

What does "lsdahdi" show? What does /etc/dahdi/system.conf show? How about "dmesg | grep dahdi"?

 

[womble1]

I did all the steps again, restarted, did them all again and restarted again and then…..

It worked…. Perfectly….
So thanks the link Brian posted did the trick after a few attempts.

Cheers.

 

[blanchae]

Practice makes perfect....