SOLVED Asterisk not starting after install in HiFormance

[360andy]

I did an install according to the instructions posted at http://nerdvittles.com/?p=25645 and everything was working well.

The next day I tried to ssh root and ping the site and got nothing. I could login using their emergency serial login. I contacted tech support and their only response was "Shall I terminate current server 23.95.198.76 and reset new one for you. Please note that server IP will change and data will be lost." I told them I just needed access.

The next email I got from them indicated they created a new server with a new ip address and so reluctantluy I started over.

Did a complete install and PBXSTATUS indicated Asterisk was not running. I could not get Asterisk to load from the root ssh as well as no web access except to webmin. So I thought maybe I did something wrong on the install.

So I reinstalled the OS and did a new install very carefully following the instructions on http://nerdvittles.com/?p=25645. Still no Asterisk running and no ability to access by a web browser. Webmin is working.

Any Ideas?

Thanks Andy

 

[360andy]

After using the installation scripts on a cheap cloudatcost server running 64 bit version of Centos 6.9 it worked just like it was designed. I then reinstalled on HiFormance 64 bit and it worked as designed.

To the best of my ability I thought it was running on the 32 bit version, but I was probably wrong. Not sure what the differences are but all is well now

Thanks