QUESTION Caller-ID-Superfecta whocalled.us Spam Return 0

[Trimline2]

I'm using Module version 2.11.5 on (below) and have the module whocalled.us activated with both an ID and password registered. If a spam call comes in, and one just did, I have it redirected to Lenny. The problem I just encountered was the return for 4142325011 was 0 - see http://whocalled.us/lookup/4142325011 . I did a debug trace:

Searching Who Called ...
Orignal Raw Returned Data:
success=1&who=Wisconsin
Wisconsin'
result

took 0.1020 seconds.

I have my spam filter set to 5. I tested this on another installation and got the same results.

Do I have something setup incorrectly, or is there a newer version available?

TIA.




│ PIAF Installed Version = 2.0.6.4 under *HARDWARE* │
│ FreePBX Version = 2.11.0.11 │
│ Running Asterisk Version = 11.5.1 │
│ Asterisk Source Version = 11.5.1 │
│ Dahdi Source Version = 2.7.0.1 │
│ Libpri Source Version = 1.4.14 │
│ IP Address = 192.168.1.123 on eth0 │
│ Operating System = CentOS release 6.4 (Final) │
│ Kernel Version = 2.6.32-358.6.2.el6.i686 - 32 Bit

 

[Trimline2]

Thanks for that information, I was thinking that perhaps I had done something wrong...

 

[Trimline2]

Works well and prefixes with SPAM... thanks!

 

[krzykat]

Silly question here ... how do I register for whocalled.us ?? I'd like to use it to weed out SPAM calls, but you must be registered, and on their site, I find no such links.

 

[Trimline2]

It appears that they have changed their web site; to me, it looks like they are in the midst of a major renovation. I can login but cannot locate where one would sign up. I would give it a few days.

 

[krzykat]

Good, so its not just me going nuts after an all-night programming session.