dbaum
Guru
- Joined
- Jan 11, 2009
- Messages
- 124
- Reaction score
- 2
Incredible PBX 11.16-04 hosted at RentPBX on CenOS 6.6
Configured for Vitelity trunk only.
Incoming calls work find
All outgoing, non-feature, calls fail with 603. Features and internal calls work fine.
Suspect Trunk or Calling rules failure but verified trunk is registered with carrier.
Log files for Verbose with no Debug and with Debug of calling extension peer are attached.
In reviewing logs I noted that "trunkdial-failover-0.3" is the executed macro, even thoughh the product version is "04" . I checked the extensions.conf file and it contains "trunkdial-failover-0.4"
Why is this?
Also noted comparison of SIP DOMAIN and FROM_IP fails apparently because FROM_ IP has ";transport=UDP" at the end. I m unable to find any setting that includes this language but see it in the SIP messages. However the express that determines FROM_IP does not seem to include logic to address the comment that ends the expression.
Suggestions would be appreciated
Configured for Vitelity trunk only.
Incoming calls work find
All outgoing, non-feature, calls fail with 603. Features and internal calls work fine.
Suspect Trunk or Calling rules failure but verified trunk is registered with carrier.
Log files for Verbose with no Debug and with Debug of calling extension peer are attached.
In reviewing logs I noted that "trunkdial-failover-0.3" is the executed macro, even thoughh the product version is "04" . I checked the extensions.conf file and it contains "trunkdial-failover-0.4"
Why is this?
Also noted comparison of SIP DOMAIN and FROM_IP fails apparently because FROM_ IP has ";transport=UDP" at the end. I m unable to find any setting that includes this language but see it in the SIP messages. However the express that determines FROM_IP does not seem to include logic to address the comment that ends the expression.
Suggestions would be appreciated
Phone System 