CID Superfecta not working

[foneman]

Sources

White Pages:
Yellow Pages: Addresses:
Asterisk Phonebook:
AstriDex:
Google: PhoneSpamFilter:
AsteriDex:
Superfecta Cache:
SugarCRM: ==>

 

[FitnessPlus]

This is not in the same order as the debug information you posted above. In order to help I need a complete and consistent picture of what is going on. I also need you to disable the sources one by one as I instructed so we can narrow down the issue to the root cause.

 

[foneman]

Found

I saw that in the sources there was listed Astridex then 2 lines down was Asteridex. The first is what gave the notice of
result

took 0.0003 seconds. with no source listed. I removed and will test now....

 

[foneman]

New CLI

I set to only check Asterisk Phonebook which is the only result that showed my name on the debug and here is the CLI
Connected to Asterisk 1.4.21.2 currently running on tncomm (pid = 3216)
Verbosity is at least 8
-- Starting simple switch on 'Zap/1-1'
-- Executing [s@from-zaptel:1] NoOp("Zap/1-1", "Entering from-zaptel with DID == ") in new stack
-- Executing [s@from-zaptel:2] Ringing("Zap/1-1", "") in new stack
-- Executing [s@from-zaptel:3] Set("Zap/1-1", "DID=s") in new stack
-- Executing [s@from-zaptel:4] NoOp("Zap/1-1", "DID is now s") in new stack
-- Executing [s@from-zaptel:5] GotoIf("Zap/1-1", "1?zapok:notzap") in new stack
-- Goto (from-zaptel,s,8)
-- Executing [s@from-zaptel:8] NoOp("Zap/1-1", "Is a Zaptel Channel") in new stack
-- Executing [s@from-zaptel:9] Set("Zap/1-1", "CHAN=1-1") in new stack
-- Executing [s@from-zaptel:10] Set("Zap/1-1", "CHAN=1") in new stack
-- Executing [s@from-zaptel:11] Macro("Zap/1-1", "from-zaptel-1|s|1") in new stack
-- Executing [s@macro-from-zaptel-1:1] NoOp("Zap/1-1", "Entering macro-from-zaptel-1 with DID = s and setting to: 6156908650") in new stack
-- Executing [s@macro-from-zaptel-1:2] Set("Zap/1-1", "__FROM_DID=6156908650") in new stack
-- Executing [s@macro-from-zaptel-1:3] Goto("Zap/1-1", "from-trunk|6156908650|1") in new stack
-- Goto (from-trunk,6156908650,1)
== Channel 'Zap/1-1' jumping out of macro 'from-zaptel-1'
-- Executing [6156908650@from-trunk:1] Set("Zap/1-1", "__FROM_DID=6156908650") in new stack
-- Executing [6156908650@from-trunk:2] Gosub("Zap/1-1", "cidlookup|cidlookup_3|1") in new stack
-- Executing [cidlookup_3@cidlookup:1] Set("Zap/1-1", "CALLERID(name)=") in new stack
-- Executing [cidlookup_3@cidlookup:2] Return("Zap/1-1", "") in new stack
-- Executing [6156908650@from-trunk:3] Gosub("Zap/1-1", "app-blacklist-check|s|1") in new stack
-- Executing [s@app-blacklist-check:1] LookupBlacklist("Zap/1-1", "") in new stack
-- Executing [s@app-blacklist-check:2] GotoIf("Zap/1-1", "0?blacklisted") in new stack
-- Executing [s@app-blacklist-check:3] Return("Zap/1-1", "") in new stack
-- Executing [6156908650@from-trunk:4] ExecIf("Zap/1-1", "1 |Set|CALLERID(name)=615xxxxxxx") in new stack
-- Executing [6156908650@from-trunk:5] SetMusicOnHold("Zap/1-1", "Trial") in new stack
-- Executing [6156908650@from-trunk:6] Set("Zap/1-1", "__MOHCLASS=Trial") in new stack
-- Executing [6156908650@from-trunk:7] Set("Zap/1-1", "FAX_RX=1100") in new stack
-- Executing [6156908650@from-trunk:8] Set("Zap/1-1", "[email protected]") in new stack
-- Executing [6156908650@from-trunk:9] Answer("Zap/1-1", "") in new stack
-- Executing [6156908650@from-trunk:10] Wait("Zap/1-1", "3") in new stack
-- Executing [6156908650@from-trunk:11] Set("Zap/1-1", "__CALLINGPRES_SV=allowed_not_screened") in new stack
-- Executing [6156908650@from-trunk:12] SetCallerPres("Zap/1-1", "allowed_not_screened") in new stack
-- Executing [6156908650@from-trunk:13] Set("Zap/1-1", "__ALERT_INFO=info=<Bellcore-dr4>") in new stack
-- Executing [6156908650@from-trunk:14] Goto("Zap/1-1", "app-daynight|0|1") in new stack

It is showing that it is setting the name as the phone number.