TIPS Direct SIP Dialing and DNS SRV resolution

[w1ve]

So,

I have a domain registered with SIP THOR and have all the correct DNS SRV and NAPTR records set.
Other clients are able to call me fine.

So, I set up a custom extension on my PBX and set the custom dial string to dial SIP/[email protected]. However, the client never rings, and when I look at the very cool SIP trace on the SIP THOR platform, I never see the call come in.

I do have SRV Lookup = YES in Asterisk SIP settings.

This is an old PBX-in-a-Flash server that just chugs along very nicely.

 

[billsimon]

Enable SIP debugging and see where the traffic is going and, if it's going to the right place, whether you are getting a reply. CLI> sip set debug on

 

[w1ve]

Had done that already Bill.

http://nerdvittles.com/?p=6914 helped. the key was:

echo "enable=yes" >> /etc/asterisk/dnsmgr.conf
echo "srvlookup=yes" >> /etc/asterisk/sip_general_custom.conf

Thanks,

Gerry