Extension Outbound Dialing No longer works after SIP ISN dialing is enables

[dbaum]

I installed the extension based ISN dialing support and ISN dialing works perfectly. Inbound ISN calls are properly delivered, and outbound calls are completed correctly.

HOWEVER, now I cannot originate a non-ISN outbound call. The call fails and returns congestion tone.

Log shows:
Executing [7039794466@from-internal:1] NoOp("SIP/2102-0935dde8", "Received incoming SIP connection from unknown peer to 7039794466") in new stack
-- Executing [7039794466@from-internal:2] Set("SIP/2102-0935dde8", "DID=7039794466") in new stack
-- Executing [7039794466@from-internal:3] Goto("SIP/2102-0935dde8", "s|1") in new stack
-- Goto (from-internal,s,1)
-- Executing [s@from-internal:1] Macro("SIP/2102-0935dde8", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/2102-0935dde8", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,4)
-- Executing [s@macro-hangupcall:4] GotoIf("SIP/2102-0935dde8", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,7)
-- Executing [s@macro-hangupcall:7] GotoIf("SIP/2102-0935dde8", "1?theend") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] Hangup("SIP/2102-0935dde8", "") in new stack

This appears to be coming from [from-sip-external] context and should not be applied to this call.

 

[blanchae]

I would check your context names for conflicts - example: same name used for a SIP trunk vs. ISN or username the same in both.