FreePBX warning in PIAF 2.0.6.2

[yajrendrag]

from the freepbx notices section of the status page:

retrieve_conf failed to sym link:
/etc/asterisk/ccss.conf from campon/etc
This can result in FATAL failures to your PBX. If the target file exists and not identical, the symlink will not occur and you should rename the target file to allow the automatic sym link to occur and remove this error, unless this is an intentional customization.
Added 21 hours, 39 minutes ago
(retrieve_conf.SYMLINK)

I'm pretty certain this attributable to running incrediblepbx29.x, but can't find the log for that to check for sure.

Is there something need to change or is this by design?

status:
Date and Time = 201201031657
PIAF color = PURPLE
Asterisk Status = ONLINE
Dahdi Status = ONLINE
MySql Status = ONLINE
SSH Status = ONLINE
Apache Status = ONLINE
Iptables Status = ONLINE
Ip6tables Status = ONLINE
Fail2ban Status = ONLINE
IP Connect Status = ONLINE
Free Disk Space = ADEQUATE
Free Memory = ADEQUATE
NTPD Status = ONLINE
Sendmail Status = ONLINE
Samba Status = OFFLINE
Webmin Status = ONLINE
Ethernet 0 Status = N/A
Ethernet 1 Status = ONLINE
Wlan Status = N/A
PIAF Installed Version = 2.0.6.2
Freepbx Version = 2.9.0.7
Running Asterisk = 1.8.8.0
Asterisk Source Version = 1.8.8.0
Dahdi Source = 2.5.0.2+2.5.0.2
Zaptel Source = UNAVAILABLE
Libpri Source = 1.4.12
Addons Source = UNAVAILABLE
pbx.local on 192.168.1.126 - eth1
CentOS release 6.2 (Final) :32 Bit Kernel: 2.6.32-220.2.1.el6.i686
*************************************************

 

[chibiconsulting]

failed to sym link: /etc/asterisk/ccss.conf

retrieve_conf failed to sym link:
/etc/asterisk/ccss.conf from campon/etc

If you do not need camp on functionality, you can remove the campon module and that should resolve this message.

chibiconsulting

 

[randy7376]

FreePBX can't make the symlink as there is already a file named /etc/asterisk/ccss.conf present.

To fix, do this:

mv /etc/asterisk/ccss.conf /etc/asterisk/ccss.conf.backup

The next time you do an "Apply Configuration", the symlink will be created and the message will go away.

 

[yajrendrag]

thanks again...