Gtalk/Gvoice has stopped working for me.

[MisterQ]

Gtalk/Gvoice was working. It has stopped. I have reinstalled twice, just to make sure that I am up to date. Getting "all circuits are busy...
with a SIP Channel , I can turn on Sip Debug, and possibly work out what is going wrong, but there doesn't seem to be any debug facility in the Gtalk Channel driver.

I am getting the following, trying just to dial a directory (routename and GV number masked...) number.

Any suggestions on how to debug this..

pqpbx*CLI> 

    -- Executing [6035551212@from-internal:3] Set("SIP/704-00000001", "_NODEST=") in new stack
    -- Executing [6035551212@from-internal:4] Macro("SIP/704-00000001", "record-enable,704,OUT,") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("SIP/704-00000001", "1?check") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] ExecIf("SIP/704-00000001", "0?MacroExit()") in new stack
    -- Executing [s@macro-record-enable:5] GotoIf("SIP/704-00000001", "0?Group:OUT") in new stack
    -- Goto (macro-record-enable,s,14)
    -- Executing [s@macro-record-enable:14] GotoIf("SIP/704-00000001", "0?IN") in new stack
    -- Executing [s@macro-record-enable:15] ExecIf("SIP/704-00000001", "1?MacroExit()") in new stack
    -- Executing [6035551212@from-internal:5] Macro("SIP/704-00000001", "dialout-trunk,2,16035551212,") in new stack
    -- Executing [s@macro-dialout-trunk:1] Set("SIP/704-00000001", "DIAL_TRUNK=2") in new stack
    -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/704-00000001", "0?sub-pincheck,s,1") in new stack
    -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/704-00000001", "0?disabletrunk,1") in new stack
    -- Executing [s@macro-dialout-trunk:4] Set("SIP/704-00000001", "DIAL_NUMBER=16035551212") in new stack
    -- Executing [s@macro-dialout-trunk:5] Set("SIP/704-00000001", "DIAL_TRUNK_OPTIONS=tr") in new stack
    -- Executing [s@macro-dialout-trunk:6] Set("SIP/704-00000001", "OUTBOUND_GROUP=OUT_2") in new stack
    -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/704-00000001", "1?nomax") in new stack
    -- Goto (macro-dialout-trunk,s,9)
    -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/704-00000001", "0?skipoutcid") in new stack
    -- Executing [s@macro-dialout-trunk:10] Set("SIP/704-00000001", "DIAL_TRUNK_OPTIONS=") in new stack
    -- Executing [s@macro-dialout-trunk:11] Macro("SIP/704-00000001", "outbound-callerid,2") in new stack
    -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/704-00000001", "0?Set(CALLERPRES()=)") in new stack
    -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/704-00000001", "0?Set(REALCALLERIDNUM=704)") in new stack
    -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/704-00000001", "1?normcid") in new stack
    -- Goto (macro-outbound-callerid,s,6)
    -- Executing [s@macro-outbound-callerid:6] Set("SIP/704-00000001", "USEROUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:7] Set("SIP/704-00000001", "EMERGENCYCID=") in new stack
    -- Executing [s@macro-outbound-callerid:8] Set("SIP/704-00000001", "TRUNKOUTCID=10digGtalkno") in new stack
    -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/704-00000001", "1?trunkcid") in new stack
    -- Goto (macro-outbound-callerid,s,12)
    -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/704-00000001", "1?Set(CALLERID(all)=10diggtalkno)") in new stack
    -- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/704-00000001", "0?Set(CALLERID(all)=)") in new stack
    -- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/704-00000001", "0?Set(CALLERID(all)=)") in new stack
    -- Executing [s@macro-outbound-callerid:15] ExecIf("SIP/704-00000001", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
    -- Executing [s@macro-dialout-trunk:12] GosubIf("SIP/704-00000001", "0?sub-flp-2,s,1") in new stack
    -- Executing [s@macro-dialout-trunk:13] Set("SIP/704-00000001", "OUTNUM=16035551212") in new stack
    -- Executing [s@macro-dialout-trunk:14] Set("SIP/704-00000001", "custom=AMP") in new stack
    -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/704-00000001", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default))") in new stack
    -- Executing [s@macro-dialout-trunk:16] ExecIf("SIP/704-00000001", "0?Set(DIAL_TRUNK_OPTIONS=M(confirm))") in new stack
    -- Executing [s@macro-dialout-trunk:17] Macro("SIP/704-00000001", "dialout-trunk-predial-hook,") in new stack
    -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/704-00000001", "") in new stack
    -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/704-00000001", "0?bypass,1") in new stack
    -- Executing [s@macro-dialout-trunk:19] GotoIf("SIP/704-00000001", "1?customtrunk") in new stack
    -- Goto (macro-dialout-trunk,s,23)
    -- Executing [s@macro-dialout-trunk:23] Set("SIP/704-00000001", "pre_num=AMP:local/") in new stack
    -- Executing [s@macro-dialout-trunk:24] Set("SIP/704-00000001", "the_num=OUTNUM") in new stack
    -- Executing [s@macro-dialout-trunk:25] Set("SIP/704-00000001", "post_num=@googlevoice-route-name") in new stack
    -- Executing [s@macro-dialout-trunk:26] GotoIf("SIP/704-00000001", "1?outnum:skipoutnum") in new stack
    -- Goto (macro-dialout-trunk,s,27)
    -- Executing [s@macro-dialout-trunk:27] Set("SIP/704-00000001", "the_num=16035551212") in new stack
    -- Executing [s@macro-dialout-trunk:28] Dial("SIP/704-00000001", "local/16035551212@googlevoice-route-name,300,") in new stack
    -- Called local/16035551212@googlevoice-route-name
    -- Executing [16035551212@googlevoice-route-name:1] Dial("Local/16035551212@googlevoice-route-name-052e;2", "Gtalk/trunk-name/[email protected],tr") in new stack
    -- Called Gtalk/route-name/[email protected]
    -- Gtalk/[email protected] is ringing
    -- Local/16035551212@googlevoice-route-name-052e;1 is ringing
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [[email protected]:2] NoOp("Local/16035551212@googlevoice-route-name-052e;2", "GoogleVoice Call to 16035551212 failed") in new stack
    -- Auto fallthrough, channel 'Local/16035551212@googlevoice-route-name-052e;2' status is 'CHANUNAVAIL'
    -- Local/16035551212@googlevoice-route-name-052e;1 is circuit-busy
  == Everyone is busy/congested at this time (1:0/1/0)
    -- Executing [s@macro-dialout-trunk:29] NoOp("SIP/704-00000001", "Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 0") in new stack
    -- Executing [s@macro-dialout-trunk:30] Goto("SIP/704-00000001", "s-CONGESTION,1") in new stack
    -- Goto (macro-dialout-trunk,s-CONGESTION,1)
    -- Executing [s-CONGESTION@macro-dialout-trunk:1] Set("SIP/704-00000001", "RC=0") in new stack
    -- Executing [s-CONGESTION@macro-dialout-trunk:2] Goto("SIP/704-00000001", "0,1") in new stack
    -- Goto (macro-dialout-trunk,0,1)
    -- Executing [0@macro-dialout-trunk:1] Goto("SIP/704-00000001", "continue,1") in new stack
    -- Goto (macro-dialout-trunk,continue,1)
    -- Executing [continue@macro-dialout-trunk:1] GotoIf("SIP/704-00000001", "1?noreport") in new stack
    -- Goto (macro-dialout-trunk,continue,3)
    -- Executing [continue@macro-dialout-trunk:3] NoOp("SIP/704-00000001", "TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 0 - failing through to other trunks") in new stack
    -- Executing [continue@macro-dialout-trunk:4] Set("SIP/704-00000001", "CALLERID(number)=704") in new stack
    -- Executing [6035551212@from-internal:6] Macro("SIP/704-00000001", "outisbusy,") in new stack
    -- Executing [s@macro-outisbusy:1] Progress("SIP/704-00000001", "") in new stack
    -- Executing [s@macro-outisbusy:2] GotoIf("SIP/704-00000001", "0?emergency,1") in new stack
    -- Executing [s@macro-outisbusy:3] GotoIf("SIP/704-00000001", "0?intracompany,1") in new stack
    -- Executing [s@macro-outisbusy:4] Playback("SIP/704-00000001", "all-circuits-busy-now&pls-try-call-later, noanswer") in new stack
    -- <SIP/704-00000001> Playing 'all-circuits-busy-now.gsm' (language 'en')
    -- Executing [h@googlevoice-route-name:1] Hangup("Local/16035551212@googlevoice-route-name-052e;2", "") in new stack
  == Spawn extension (googlevoice-route-name, h, 1) exited non-zero on 'Local/16035551212@googlevoice-route-name-052e;2'
    -- <SIP/704-00000001> Playing 'pls-try-call-later.gsm' (language 'en')
    -- Executing [s@macro-outisbusy:5] Congestion("SIP/704-00000001", "20") in new stack
  == Spawn extension (macro-outisbusy, s, 5) exited non-zero on 'SIP/704-00000001' in macro 'outisbusy'
  == Spawn extension (from-internal, 6035551212, 6) exited non-zero on 'SIP/704-00000001'
    -- Executing [h@from-internal:1] Hangup("SIP/704-00000001", "") in new stack
  == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/704-00000001'

 

[eCase]

MisterQ:
Have you found a solution yet?
I had similar issues with "Network Congestion" problems, but not with google voice - I was using Vitelity.
I either solved the problem by bonding multiple network-interface-cards OR by increasing the channel amount with Vitelity OR by disabling my DHCP firewall and running ALL machines on LAN with static ips. I was desperate to fix it and was working fast, so I am not sure which (if any) trick solved the issue.
But I haven't seen it come back in over two months
Good luck!

 

[tm1000]

There is dbug in the gtalk driver but it has to be turned on in jabber.conf as it's rather noisy.