Hamachi Login problems.

[w1ve]

The problem is with a cloud-based piaf (rentpbx).

Here's my config:

PBX in a Flash GOLD Status
──────────────────────────────────────────────────────────────────────────────
┌────────────────────────System Information───────────────────────────┐
│ Asterisk = ONLINE | Zaptel = ONLINE | MySQL = ONLINE │
│ SSH = ONLINE | Apache = ONLINE | Iptables = ONLINE │
│ Fail2ban = ONLINE | Internet = ONLINE | Ip6Tables = ONLINE │
│ BlueTooth = OFFLINE | Hidd = OFFLINE | NTPD = ONLINE │
│ SendMail = ONLINE | Samba = OFFLINE | Webmin = ONLINE │
│ Ethernet0 = ONLINE | Ethernet1 = N/A | Wlan0 = N/A │
│ │
│ PBX in a Flash Version = 1.7.5.5 Running on *HARDWARE* │
│ FreePBX Version = 2.8.1.4 │
│ Running Asterisk Version = Asterisk 1.4.21.2 │
│ Asterisk Source Version = 1.4.21.2 │
│ Zaptel Source Version = 1.4.12.1 │
│ Libpri Source Version = 1.4.11.3 │
│ Addons Source Version = 1.4.11 │
│ IP Address = XX.XX.XX.XXX on eth0 │
│ Operating System = CentOS release 5.5 (Final) │
│ Kernel Version = 2.6.18-164.15.1.el5xen - 32 Bit │
└─────────────────────────────────────────────────────────────────────┘

I have many other systems on my Hamachi network. However, my login always fails from this pbx. Here's the debug:

root@pbx:~ $ hamachi start debug
08 09:00:01.486 [ 142] [ 5055] ipc: login
08 09:00:01.486 [ 142] [ 5055] ses: set_reconn(no)
08 09:00:01.486 [ 142] [ 5055] ses: go_online
08 09:00:01.486 [ 142] [ 5055] ses: state 1.1 -> 2.0
08 09:00:01.508 [ 143] [ 5055] ses: resolved bibi.hamachi.cc -> 64.94.18.67
08 09:00:01.508 [ 143] [ 5055] ses: state 2.0 -> 2.1
08 09:00:01.508 [ 143] [ 5055] ses: state 2.1 -> 3.0
08 09:00:01.508 [ 143] [ 5055] ses: connecting to 64.94.18.67:12975 ..
08 09:00:01.520 [ 144] [ 5055] ses: io_ready -- XX.XX.XX.XXX:40226
08 09:00:01.520 [ 144] [ 5055] ses: state 3.0 -> 3.1
08 09:00:01.520 [ 144] [ 5055] ses: state 3.1 -> 4.0
08 09:00:01.520 [ 144] [ 5055] ses: sending helo ..
08 09:00:01.578 [ 145] [ 5055] ses: received helo.ok
08 09:00:01.614 [ 145] [ 5055] ses: state 4.0 -> 4.1
08 09:00:01.614 [ 145] [ 5055] ses: state 4.1 -> 6.0
08 09:00:01.626 [ 145] [ 5055] ses: sending auth 5.XXX.XX.X ..
08 09:00:01.968 [ 147] [ 5055] ses: error 6 0 248
08 09:00:01.968 [ 147] [ 5055] ses: go_offline
08 09:00:01.968 [ 147] [ 5055] ses: state 6.0 -> 1.0
08 09:00:01.968 [ 147] [ 5055] ses: state 1.0 -> 1.1
08 09:00:01.968 [ 147] [ 5055] ses: purging state ..

Any ideas?

TIA,

Gerry