How to set qualifyfreqok for IAX2 devices

[bc3011]

I am trying to get qualifyfreqok set for iax2 devices that I create via the pbx in a flash gui. The gui doesn't have an option to set the qualifyfreqok or add custom settings when I create or modify an iax device. I need the frequency of the check to be less than the default of 60 seconds.

If I edit iax_addtional.conf by hand to add qualifyfreqok=20000 to the device config and reload, I see the server send a check out every 20 seconds. The problem is once I make any changes via the gui the config is naturally rewritten and I lose the option.

Is there away to define the qualifyfreqok option either globally or can I can put option in another file that isn't written out by pbx in a flash and associate it with a device? I don't want to lose the management of the devices via the gui by creating them in another config and just including it. Any ideas?

 

[blanchae]

Standard questions:

What version of Piaf are you using?

What version of FreePBX are you running?

If you want faster help, follow these guidelines...

 

[bc3011]

piaf version 1.7.5.5
FreePBX version 2.8.1.4

 

[blanchae]

Isn't there a IAX2 protocol module for FreePBX 2.8? This is not the IX2 extension configuration.

 

[bc3011]

Thanks lgaetz for helping that dim little light turn on in my tiny brain. If i would have properly read all of the iax.conf file before i would have noticed this greatly useful piece of info at the very bottom of the file.

;iax_custom_post.conf will allow you to modify FreePBX generated IAX setups so
;that you can add additional parameters to a auto-generated setup.
;if you have a auto-generated context of [foobar] and need to add a parameter
;to it then create this line [foobar](+) and place your additions on the next line
;
#include iax_custom_post.conf

So in my auto generated iax_addtional.conf file i have this.

[9000]
deny=0.0.0.0/0.0.0.0
secret=giggity02
transfer=no
context=from-internal
host=dynamic
type=friend
port=4569
qualify=yes
dial=IAX2/9000
mailbox=9000@device
permit=0.0.0.0/0.0.0.0
callerid=device <9000>
setvar=REALCALLERIDNUM=9000


In my iax_custom_post.conf is

[9000](+)
qualifyfreqok=20000

I tried putting it in the iax_custom.conf file but I guess since its included before iax_addtional.conf it either tries to add something to a nonexistent context or is overwritten by iax_addtional.conf

Now my system is sending out checks every 20 seconds and keeping the session open through our firewall and not getting overwritten anytime a change is made.