sean.whitney
New Member
- Joined
- Apr 3, 2008
- Messages
- 6
- Reaction score
- 0
I have a PIAF box that was previously a trixbox. It has a TDM-400 card that I'm using for one POTS line. I have a Linksys PAP2 with two analog phone connected for the extensions.
I have an issue right now where answering a POTS call seems to end in one of three different states
1. The call completes fine. - 50%
2. There is no audio heard on the SIP extension. I can confirm that the dahdi trunk hears the incoming audio from the caller with dahdi_monitor however I can't hear it on the SIP extension. There is also no audio from the handset mic to the earpiece. - 25%
3. The call is answer, with no audio, however the other end still rings. If I hang up I might get another ring and then successfully complete the call. - 25%
Thanks for any help,
Sean
I have an issue right now where answering a POTS call seems to end in one of three different states
1. The call completes fine. - 50%
2. There is no audio heard on the SIP extension. I can confirm that the dahdi trunk hears the incoming audio from the caller with dahdi_monitor however I can't hear it on the SIP extension. There is also no audio from the handset mic to the earpiece. - 25%
3. The call is answer, with no audio, however the other end still rings. If I hang up I might get another ring and then successfully complete the call. - 25%
Thanks for any help,
Sean