PIONEERS Incredible PBX 2026 for Raspberry Pi

[wardmundy]

If you have a RasPi 4, 400, 5, or 500 with at least 4GB of RAM, today is your lucky day.

On your PC, Mac, or Linux Desktop

1. Download the latest Raspberry Pi Imager for your platform.
2. Insert a 32GB MicroSD card into one of these devices
3. Plug the device into your computer
4. Run the Imager app and follow these steps: choose your Pi 4/400 or 5/500 platform, and choose Raspberry Pi other image
5. Select Raspberry Pi OS Lite (64-bit) image for trixie.
6. Choose your SD card destination and Skip Customization, then Write and Finish by removing device.

On your Raspberry Pi

1. Insert the microSD card and boot the machine
2. Specify nerd as new user with password for the password
3. Login as nerd
4. Run: sudo passwd root
5. Logout and log back in as root
6. Run: userdel nerd
7. Run: raspi-config and configure WiFi in System Options and Expand Disk in Additional Options
8. Run: systemctl stop nftables
9. Run: systemctl disable nftables
10. Run: systemctl mask nftables
11. Run: nano -w /etc/ssh/sshd_config and Change then Save:
PermitRootLogin yes
PasswordAuthentication yes
KbdInteractiveAuthentication yes
12. Run: systemctl restart ssh
13. Run: reboot
14. Login via SSH as root and issue the following commands to install Incredible PBX 2026:

wget https://filedn.com/lBgbGypMOdDm8PWOoOiBR7j/IncrediblePBX2026/IncrediblePBX2026-raspi.sh
chmod +x IncrediblePBX2026-raspi.sh
./IncrediblePBX2026-raspi.sh

 

[KNERD]

Raspberry Pi should be dropped for a while.








Meanwhile:

 

[wardmundy]

@KNERD: Agreed. And ARM devices are still a pain in the . But there are many with old RasPi devices still lying around. Gotta say I still love their all-in-one keyboards, but they've gotten pricey, too. Almost $300...

 

[wardmundy]

Changing WiFi Credentials... in case you ever need to.

Google Search

 

[wardmundy]

Adding Tailscale support including IPtables Whitelist

curl -fsSL https://tailscale.com/install.sh | sh
tailscale up
# then connect to your account with the provided browser link
/root/add-ip tailscale 100.64.0.0/10

 

[wardmundy]

Getting Started

1. Change your Time Zone with the script in /root
2. Change your FreePBX admin password with the script in /root
3. Replace SendMail with Postfix and Enable Gmail Smarthost with the script in /root
4. Update your root password when needed: passwd
5. If you downloaded the installer before noon on Sunday, 9/13, restore CDR to the living:

sed -i 's|x86_64|aarch64|' /etc/odbcinst.ini
reboot