Incredible PBX issue

[rob6969]

Ok, so if i install PBXIAF incoming and outgoing calls work fine, then i install incredible pbx and the incoming calls break just a busy tone when dialing in and nothing showing on the CLI i reloaded this twice and same issue both times
Any ideas?

Thanks

 

[tbrummell]

Try disabling iptables (temporarily)and see if you're allowed to dial after that. Since you don't mention your network config, this could be your issue.

 

[briankelly63]

see this thread:

http://pbxinaflash.com/community/threads/problem-with-web-logon.7328/?t=7328

 

[rob6969]

IPtables & Fail2ban

Sorry forgot to mention that i had stopped both IP tables V4 and fail2ban and it made no difference. Its just really strange that it works before incredible pbx gets loaded then just breaks, i also tried the google voice trunk within incredible pbx and again outgoing is fine but no incoming, i also do have UDP port 5060 and 10000 - 20000 open on the firewall facing the PBX

Thanks

 

[briankelly63]

se what port 5222 is doing...

http://www.google.com/support/talk/bin/answer.py?answer=27930

 

[rob6969]

I did try to forward that port but it made no difference, so it doesnt work with either a vitelity trunk or google trunk both outgoing is fine but no incoming and nothing on CLI to even see it hitting the pbx

 

[briankelly63]

Are you saying your Vitelity trunk doesn't work for incoming calls either? Was Vitelity working before you ran the Incrd script?

When things don't show in the CLI its usually because there is a networking issue. What kind of router is this? Is there a SIP or SIP ALG option that is set? If so unset it.

 

[rob6969]

Vitelity was working fine until i ran the script then it stopped working too, i agree about the CLI but i have a flashed Netgear running DDWRT and had a trixbox behind it for years without any issue and remove phones, that has now been shutdown and i thought i would try pbxiaf with incpbx but once that script runs incoming breaks outgoing is fine though

 

[rob6969]

IP6Tables was still running so i stopped that and hey presto success not sure why when im not using IP6

But at least its working

Thanks

 

[briankelly63]

Cool.... glad you got to the bottom of it..