SOLVED IncrediblePBX for Raspberry Pi B+ blank subject: on fax emails

[PatPend]

I want to use a Raspberry Pi B+ (which was sitting around unused 'til now) for IncrediblePBX but the latest build I could find is this one http://nerdvittles.com/?p=10151 which is a year and a half old at this point. What approach should I take to get a more current version onto a B+?

Primarily looking to use OAUTH2 to use a handful of GV numbers without resorting to "less secure" mode.

BTW, PBX noob here who's been fully enjoying Nerd Vittles -- many thanks for all the great work.

 

[wardmundy]

Welcome. Doesn't make much sense to continue development for B+ now that the RasPi 2 is available. Sorry.

 

[PatPend]

Thanks Ward. Nonetheless I put that B+ to work with Incredible PI 3.11.12 and it's working splendidly. The only real challenge I've run into is emailing received faxes, in that the email subject: and to: lines are blank. It would be nice to see at least the CID and name in the subject line, something like "Fax received from 123-456-7890 XYZCOMPANY" or similar. The actual pdf attachment is fine. I poked around the hylafax faxrcvd script but it wasn't clear what if anything I could change. If the fax number is routed to a phone the CID displays fine. daemon.log shows that hylafax knows the CID (631xxxxxx9) it's just not getting plugged into the subject header.

root@incrediblepbx:/var/log# tail -n 5 /var/log/daemon.log
Feb 3 15:01:57 incrediblepbx FaxGetty[3333]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyIAX0'
Feb 3 15:02:33 incrediblepbx FaxGetty[3333]: RECV FAX (000000044): from 6314xxxxx9, page 1 in 0:00:31, INF, 3.85 line/mm, 2-D MR, 9600 bit/s
Feb 3 15:02:33 incrediblepbx FaxGetty[3333]: RECV FAX (000000044): recvq/fax000000005.tif from 6314xxxxx9, route to <unspecified>, 1 pages in 0:00:36
Feb 3 15:02:33 incrediblepbx FaxGetty[3333]: RECV FAX: bin/faxrcvd "recvq/fax000000005.tif" "ttyIAX0" "000000044" ""
Feb 3 15:02:42 incrediblepbx FaxGetty[3333]: MODEM WWW.SOFT-SWITCH.ORG spandsp/

Any ideas what else I could check?

thanks,
Russ


EDIT: Solved, see http://pbxinaflash.com/community/th...-winprint-hylafax-reloaded.15757/#post-101913