Tim Schoeller
New Member
- Joined
- Oct 14, 2016
- Messages
- 5
- Reaction score
- 1
I have downloaded IncrediblePBX13.2.iso and created a USB stick. I have installed on a Lenovo M73 i3.
During install the script warns that the network is not active and instructs me to resolve the issue and run /root/firstboot
The only way to resolve the issue is to reboot the machine. After reboot 45 minutes of updating ensues. I run the /firstboot afterwards and it tries to update again but finds it up to date.
I configure a trunk (flowroute) and several extensions using pjsip default settings (I only add number and displayname). A group of deskphones and softphone clients in a ring group.
I test incoming calls and nothing happens. Caller hears long silence then ringing. Asterisk console shows right after building the ring group "lost connection to Asterisk" and the console session terminates.
I remove extensions from the ring group to discover that if all extensions are online the ring group works for local extensions. If one ore more extensions exist which is not available in the group Asterisk disconnection occurs.
Also adding a phone number (18008675309#) into the ring group results in the call being placed to the number however there is 0 way audio.
I have gone through the fresh install twice - this is a repeatable issue. I have also tried this on the Oracle VM from SourceForge with similar results.
I did install the OSS Endpoint Module and bulk extensions. I also experimented with using SIP instead of PJSIP but was not able to resolve these issues.
When using SIP I see errors in Asterisk stating that the PJSIP endpoint could not be found on register despite using port 5061 when registering on some endpoints.
I am hoping someone out there has an idea as to what is going on here.
Thanks, Tim
During install the script warns that the network is not active and instructs me to resolve the issue and run /root/firstboot
The only way to resolve the issue is to reboot the machine. After reboot 45 minutes of updating ensues. I run the /firstboot afterwards and it tries to update again but finds it up to date.
I configure a trunk (flowroute) and several extensions using pjsip default settings (I only add number and displayname). A group of deskphones and softphone clients in a ring group.
I test incoming calls and nothing happens. Caller hears long silence then ringing. Asterisk console shows right after building the ring group "lost connection to Asterisk" and the console session terminates.
I remove extensions from the ring group to discover that if all extensions are online the ring group works for local extensions. If one ore more extensions exist which is not available in the group Asterisk disconnection occurs.
Also adding a phone number (18008675309#) into the ring group results in the call being placed to the number however there is 0 way audio.
I have gone through the fresh install twice - this is a repeatable issue. I have also tried this on the Oracle VM from SourceForge with similar results.
I did install the OSS Endpoint Module and bulk extensions. I also experimented with using SIP instead of PJSIP but was not able to resolve these issues.
When using SIP I see errors in Asterisk stating that the PJSIP endpoint could not be found on register despite using port 5061 when registering on some endpoints.
I am hoping someone out there has an idea as to what is going on here.
Thanks, Tim
Phone System 