NEW Lenny Is Back for Incredible PBX 2020

[Halea]

Just tested and it worked for me. It's a SIP URI only. The other option is to just set up your own Lenny operation from the link in the original post.

Something is odd, it looks like I can't dial any SIP URIs from my system. Is there any toggle in the settings that I should check? On the other hand I remember having used SIP URIs in the past successfully even though I actually don't use any in normal operations.

 

[wardmundy]

What platform are you on and with which softphone??

 

[Halea]

Just tested and it worked for me. It's a SIP URI only. The other option is to just set up your own Lenny operation from the link in the original post.

Taking back what I said about not being able to dial any sip uri.
I simply replaced SIP/[email protected] with SIP/[email protected] and it worked without a hic. I also tried to set SIP/[email protected] as a trunk and it also worked. So the problem seems to be with
SIP/[email protected] for some reason.
I also tried the sip2sip IP address 81.23.228.137, same failure.
I am on IncrediblePBX 12 with Asterisk 13 for another few weeks. I'm using Grandstream desk phones for my tests.

 

[ostridge]

SIP/[email protected] for some reason.

Try their sip2sip test endpoints here

 

[shdwkeeper]

And, although I have "Enable Recording" checked, it records nothing. At least, there is no link in the CDR to a recording.

@tbrummell Where is the recording stored now since it isnt in CDR reports? I installed using this: http://nerdvittles.com/?p=32049

 

[ostridge]

Where is the recording stored now since it isnt in CDR reports?

The older dialplan called 'lenny Remake' included the line

exten => 53669,n,Set(RECORDING=/tmp/Lenny-${UNIQUEID}.wav)

I don't know how it then got into the monitor folder at
/var/spool/asterisk/monitor/yyyy/mm/dd ( where nested folders describe the year/month/date )
for example
/var/spool/asterisk/monitor/2020/06/14

 

[tbrummell]

Try setting "Call Record Option" to No in Advanced Settings:

 

[ostridge]

Add a custom extension - Ward uses extension 53669 (Lenny)
Under Advanced Dial: SIP/[email protected]

Try with SIP/[email protected],20,tr
It still works as @wardmundy post

 

[tbrummell]

Lenny gets another. This guy was a good sport.

This call was to my Bell Canada home phone (connected via FXO and sent directly to Lenny), which is bundled with my I'net/TV package, I don't use it, and the number is not advertised anywhere. Basically, a spam call from Bell Canada themselves.

 

[ostridge]

Sometimes the surgery or hospital gets caught by the privacy trap;
here is one matched on 'anonymous' .

 

[tbrummell]

Lenny gets the duct cleaner. Another call to my unused Bell Canada POTS line.

 

[ostridge]

the duct cleaner

Wow for a salesperson he sure does enunciate; I bet that took a fair bit of decoding. I guess its a fair price 'for free' whatever he was offering to do?

 

[shdwkeeper]

Lenny gets the duct cleaner. Another call to my unused Bell Canada POTS line.

For some unknown reason mine isn't recording, any ideas? Transferring to the 53669 works but the call never records. I have the settings set to record but there isn't a file in the /var/spool/asterisk/monitor folder. ugh

 

[tbrummell]

Did you read post #27 above?

 

[ostridge]

It's a SIP URI only

Some time ago when ppl couldnt connect @wardmundy gave us for Extension xxx /Advanced
Dial: SIP/[email protected],20,tr

while tr are dial options for allowing 'blind transfer', and 'generate ringing' respectively
what does the '20' do? - is it the ring time (seconds) ?

 

[ostridge]

Transferring to the 53669

Do you mean that you are transferring caller to the sip-uri; or are you hosting the Lenny module on the iPBX ?

 

[shdwkeeper]

Do you mean that you are transferring caller to the sip-uri; or are you hosting the Lenny module on the iPBX ?

I'm hosting Lenny just like the install instruction say to do for IPBX 2020

 

[shdwkeeper]

Did you read post #27 above?

I did try this, I can try it again. Why would that make a difference? Is that now disabling call recording for all calls, incase I want to record another call now I cant?

 

[tbrummell]

That option allows you to record a call without the call being bridged first. If you're like me, and you run your calls through an IVR first, they are not being bridged, so you need that enabled. I also had to run my incoming route through a Call Recording point first, before going to the IVR, then my call was recorded end to end.

 

[shdwkeeper]

That option allows you to record a call without the call being bridged first. If you're like me, and you run your calls through an IVR first, they are not being bridged, so you need that enabled. I also had to run my incoming route through a Call Recording point first, before going to the IVR, then my call was recorded end to end.

I have the call screening setup, if they push 5 they go through if not they get sent to disconnect or Lenny. Blacklist goto Lenny. Ok so how do i set this up?