TUTORIAL Linksys SPA2102 - End Point Manager

[Twilight Sparkle]

The way i connect my Linksys SPA2102 to PBX without having to add my ip & user & pass & vm number is i setup the End Point Manager then i find out what my IP to the Linksys SPA2102 is and i do this

1. http://LINKSYS-IP/admin/resync?t*f*t*p://SERVER-IP/spa2102.cfg
2. http://LINKSYS-IP/admin/upgrade?t*f*t*p://SERVER-IP/spa2102.cfg

you do not have to use the UPGRADE, you can just once click the ( 1 ) link and wait for it to reboot then click it again and you should be able to do calls in/out

this trick might work on other SIP boxes i has no clue!

-
to Re-sync later you will have to FACTORY RESET if you need to do a NEW IP ADDRESS!
if someone knows how to build the Linksys SPA 2102 Fireware package to my own IP so when i factory reset i never has to do the links above that would be cooL!

Hope this trick works!

 

[Twilight Sparkle]

Cool thing to is, since you are doing it this way, any CHANGES DONE ON SERVER ILL BE DONE RIGHT AWAY TO BOX!
old days you had to do Settings Change on Server, then login to Box and add the settings, now you just do it all from the End Point and click reboot and done!

Here be a Photo of my Linksys SPA2102