rick
Member
- Joined
- Dec 30, 2008
- Messages
- 175
- Reaction score
- 13
Installed new incredible 13-13 using SL6 iso on vultr, today, twice. The first time with fax add-on after installation I had no asterisk sip commands in the cli, reinstalled without the fax add-on and now I have the commands. I added a fqdn so I have full access. Setup trunk using voip.ms and it registers and used yate client and it registers.
Can call my cell but the cell can not call the pbx, rings busy.
chan_sip.c:26327 handle_request_invite: Failed to authenticate device "6158xxxxxx" <sip:[email protected]>;tag=as4bdf3082
called LENNY and demo, they work.
Finally found that there is a problem with voip.ms and the pop. when I used atlanta the pbx started working if I used atlanta2 or dallas, it registered but would not work. Also the settings on the voip.ms dashboard were set to the correct pop as well as the correct trunk setting all matched. I guess that is a conversation with voip.ms.
thanks
Can call my cell but the cell can not call the pbx, rings busy.
chan_sip.c:26327 handle_request_invite: Failed to authenticate device "6158xxxxxx" <sip:[email protected]>;tag=as4bdf3082
called LENNY and demo, they work.
Finally found that there is a problem with voip.ms and the pop. when I used atlanta the pbx started working if I used atlanta2 or dallas, it registered but would not work. Also the settings on the voip.ms dashboard were set to the correct pop as well as the correct trunk setting all matched. I guess that is a conversation with voip.ms.
thanks
Last edited: