SOLVED ONE WAY AUDIO on trunk

rick

Member
Joined
Dec 30, 2008
Messages
177
Reaction score
15
Problem I have been working on for the past few days.
ClearlyIP Appliance 716 using Centos 7, Incredible PBX 2020.2, Asterisk 16.13.0, Incredible 15.0.22.39, static IP address; this has been working perfect over the years until they lost power to the building.

Afterwards the Comcast had to replace their modem. Phone system came up and has on-way audio just on inbound calls. Outbound is two way audio. Checked sip settings - IP address and NAT are correct. SIP service is with SIPTRUNK, check their config, checked firewall, fail2ban and even turned off the firewall still no audio on in bound calls. Changed router no change. Return the original router.

Setup another trunk & number using VoIP.MS, audio in both directions inbound/outbound. Went to SIPTRUNK for an answers, they said send them data dump which I did, shows a completed connection.
While waiting on SIPTRUNK, in the meantime, I moved everything over to my PBX which is on Debian 11 in the cloud. I have the same problem no inbound audio in either direction; calling the DID has no audio. Calls made from that DID have audio.

Any ideas beside moving the number to another trunking company?
 
One way audio is usually related to NAT. You may want to try to set up a TLS trunk as VoIP.ms supports that.
 
Look at debug messages:

Run rtp set debug on in the Asterisk CLI (asterisk -rvvv) while placing an inbound test call.
  • If you only see Sent RTP packet and zero Got RTP packet lines: Your router firewall is blocking the incoming UDP 10000–20000 ports, or your external_media_address is wrong.
  • If you see both Sent and Got RTP packets on the PBX: The trunk side is fine, and the issue is between the PBX and your internal desk phone or softphone (such as a local firewall or direct_media=yes being enabled).

 
I got it working-had to add to sip config for siptrunk trunk to work correctly:

icesupport=no
canreinvite=no
directmedia=no
nat=force_rport,comedia
ignoresdpversion=yes

Don't know what changed, the standard config file without the above statements worked fine before the power outage. Had to add the above to get my cloud based PBX to work with siptrunk. Siptrunk tech is Bewildered too.
 

Forum statistics

Threads
26,863
Messages
175,673
Members
20,402
Latest member
luxploit
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.
Back
Top