QUESTION paging and intercom between two servers

[burhanhd]

Dear all
I have setup two PIAF server and both are connected over SIP Trunk.

I would like to setup a paging and intercom extension which should apply for both servers.

i would appreciate if any one can guide me for to set this up.


thanks
Burhan .

 

[rossiv]

You'll just need to format your outbound routes appropriately, and change a setting in your trunk config.

For the trunk, you'll need the context to be from-internal, rather than from-trunk.

For the outbound routes, add a rule that uses a special prefix to designate remote paging vs local paging (in my screenshot *91), strip that, and replace it with *80 (or the actual paging prefix on the foreign box).

Now if you were on this box and wanted to page the foreign box, you'd dial *91200 where 200 is the foreign extension number.
Of course, if you already had a prefix for box-to-box calls, you could use that. Example prefix of 7, you could strip 7 and pass *80.

 

[burhanhd]

Thanks rossiv

I will give it a try.

thank you again.