PBX in a Flash - Same Box -Dual Networks

[title1admin]

I can't say enough ...Thank You Thank You Thank You for the efforts making PBX in a flash! I am a novice @ this and I have a P2.4 GHz box up & going in less than 1/2 hour! Amazing! I do have a question....I have two networks which need to remain separate (no routing between them) but I'd like to place the PBX in a Flash box on both networks... for the purpose of routing calls & telephony services/calls between networks...... Other than two physical NICs and static IP's on each network, What adjustments are required to PBX in a Flash to accommodate services on both networks from the same box?

 

[telemach]

and I would like to know how to setup PIAF to work as a router/gateway
I have two NICs and what to put PIAF between cable modem and a router
and have (with full responsibility) my bot exposed to the internet

 

[tel0p]

umm

This sounds more like a CentOS or iptables issue.

This post:
http://lists.centos.org/pipermail/centos/2006-January/059457.html

..might help you with manually configuring two+ NIC's.

 

[dobbs]

Just use the Webmin access from the main menu, select Networking, then Network interface. If CentOS is recognizing your NIC cards, you will see both interfaces listed and you can configure them there.