PIAF 1.7.5.5.3 is Ready

[rapidnet]

Try now. Seem to be problems (again) with Dreamhost.

I'll again retry in a few minutes...

Moving the 32bit image over to my ISO datastore...

 

[wardmundy]

We need to know which specific files are causing problems. I've only moved the main payloads but there are dozens of other components. So take a look at the log once your install completes and post a list of the problems. Thanks.

 

[wardmundy]

Justin the Tech Guy

Check out this 1-minute time-lapse video of a PIAF 1.7.5.5.3 install. Pretty cool.

 

[rapidnet]

When I run piafdl

If I check the wget.log I see this :

[root@pbx ~]# more wget-log
--2010-11-07 20:02:22-- http://pbxinaflash.net/1755/load/purple_load.tar.gz
Resolving pbxinaflash.net... 216.239.128.70
Connecting to pbxinaflash.net|216.239.128.70|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2010-11-07 20:02:22 ERROR 404: Not Found.

I also see the same errors in the install.log

Is this good, or are there other logs you want me to check?

 

[wardmundy]

I disabled the pbxinaflash.net site which should force the download to proceed to pbxinaflash.com. Again, your log should tell you whether there was a successful download of the file. It will be immediately below the entry which you have quoted.

Pardon the inquiry, but are you installing PBX in a Flash or some home-grown version?? wget-log is not a log we use. Ours will be in your /root folder.

 

[monkeybone]

404

[root@pbxflash ~]# more wget*
--2010-11-07 19:20:33-- http://pbxinaflash.net/1755/load/purple_load.tar.gz
Resolving pbxinaflash.net... 216.239.128.70
Connecting to pbxinaflash.net|216.239.128.70|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2010-11-07 19:20:34 ERROR 404: Not Found.


Looks like there is no "load" folder, there is a load-test on the server . who's up for a symbolic link ?

 

[rapidnet]

I disabled the pbxinaflash.net site which should force the download to proceed to pbxinaflash.com. Again, your log should tell you whether there was a successful download of the file. It will be immediately below the entry which you have quoted.

Pardon the inquiry, but are you installing PBX in a Flash or some home-grown version?? wget-log is not a log we use. Ours will be in your /root folder.

wget.log

Not an issue... no home-grown here
but 64 bit....if that matters

when I run piafdl, it seems to populate the /root/wget-log file...

For me it still looks like it is failing.... I've downloaded the 32 bit version as well...I could always try that, however I'd prefer the 64 bit...

Do the errors in /root/install.log mean anything?

Installing piafxtras-1.0-1.noarch
/var/tmp/rpm-tmp.72189: line 1: cp: command not found
/var/tmp/rpm-tmp.72189: line 2: chmod: command not found
/var/tmp/rpm-tmp.72189: line 3: cat: command not found
error: %post(piafxtras-1.0-1.noarch) scriptlet failed, exit status 127

I downloaded pbxinaflash-x86_64-17553.iso from the mirror for google..

I've also cleared the cache from all of my DNS servers...just to be sure I am getting the most up to date info..

 

[wardmundy]

We don't seem to be communicating on the same frequency so I've put the load directory back in place. Good luck!

 

[rapidnet]

Ok, now on to the next stage as purple_load..tar.gz is now downloading...

Thank you!

 

[monkeybone]

this id odd.

I hard coded pbxinaflash.net to use the same IP as .com

performed the following:

http://pbxinaflash.net/1755/load/purple_load.tar.gz

and http://pbxinaflash.com/1755/load/purple_load.tar.gz

both started to download. But when I run diafdl this is what is in the wget.log:


--2010-11-07 19:58:14-- http://pbxinaflash.net/1755/load/purple_load.tar.gz
Resolving pbxinaflash.net... 174.37.6.70
Connecting to pbxinaflash.net|174.37.6.70|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2010-11-07 19:58:14 ERROR 404: Not Found.

 

[monkeybone]

undid my dns changed and what you did worked for me. Downloading now.

thank you.

 

[rapidnet]

We don't seem to be communicating on the same frequency so I've put the load directory back in place. Good luck!

Not sure what you mean...


but the install seems to be working now.

So, I like whatever you did!