SUGGESTIONS PIAF 2.0.6.2, Ast 10, Freepbx 2.10 on Atom

[gregc]

Just went live today with an Atom D425 (single core 1.8Ghz) from Foxconn with 1GB of RAM.

PIAF Installed Version = 2.0.6.2
Freepbx Version = 2.10.0rc1.3
Running Asterisk = 10.0.0
Asterisk Source Version = 10.0.0
Dahdi Source = 2.6.0+2.6.0

Were using 15 Aastra 57i phones and a SPA2102 providing lines to two analog fax machines.

SIP and IAX through Vitelity, Flowroute, and Voip.ms. No Google Voice.

Top shows the cpu anywhere from 15%-85%. Over 300 minutes in the last three hours. About 6-7 concurrent calls when I looked.

Using soundcard line in for music on hold.

Using Aastra scripts.

Only issues I've had is what I've described here and I haven't been able to migrate my fop2 license yet (will do that when Nicolas logs on and helps me with a revoke issue).

Other than that so far so good. Things are running well (knock on wood).

Oh, and the boot up time on this thing is a fraction of what it was on a dual core atom with 2GB ram running PIAF 1.7.5.5 with Ast 1.6 and Freepbx 2.8.

Just thought I'd share.

-Greg

 

[wardmundy]

Ordered one for testing. Great news!

 

[gregc]

FOP2 has been successfully migrated and it is all working great.

I also should mention that I did incorporate the verbose=0 setting due to the testing blanchae was doing.

-Greg

 

[gregc]

I hadn't run top since yesterday morning's initial monitoring. After getting FOP2 migrated, fixing a couple things I missed (setting voicemail polling frequency) and doing a reboot during lunch, I hadn't checked it.

It looks like the reboot settled a few things because this morning CPU is .3-50% and it seems to be bouncing around <20% the majority of the time.

-Greg