therock112
Member
- Joined
- Dec 13, 2007
- Messages
- 143
- Reaction score
- 0
Polycom Ip phone How-TO pop-up notice on display
I was going thru the new 3.1 series of polycom firmware for the soundpoint series IP phones, (301/501/550 etc) and on page 4-72 of the Sip 3.1 administrators guide, there is a very short blurp about how to display a 3 second notification on the polycom phone's display via sip header.
Has any tried this or have a clue on how to do this from piaf 1.4 32bit ver?
The pdf can be viewed from the following link if anyone is interested in checking this out, I would be very interested to know how to put up a server generated message on the phones display sent from asterisk either triggered by an event, time or other:
http://www.polycom.com/common/docum...ducts/voice/spip_ssip_Admin_Guide_SIP_3_1.pdf
this would be ideal when call parking, sending out a notice, and other interesting/usefull applications.
Thanks for any suggestions or ideas.
I was going thru the new 3.1 series of polycom firmware for the soundpoint series IP phones, (301/501/550 etc) and on page 4-72 of the Sip 3.1 administrators guide, there is a very short blurp about how to display a 3 second notification on the polycom phone's display via sip header.
Has any tried this or have a clue on how to do this from piaf 1.4 32bit ver?
The pdf can be viewed from the following link if anyone is interested in checking this out, I would be very interested to know how to put up a server generated message on the phones display sent from asterisk either triggered by an event, time or other:
http://www.polycom.com/common/docum...ducts/voice/spip_ssip_Admin_Guide_SIP_3_1.pdf
this would be ideal when call parking, sending out a notice, and other interesting/usefull applications.
Thanks for any suggestions or ideas.
Phone System 