SOLVED Raspberry Pi Trunk to PIAF Green/Incredible PBX

[Tony Bui]

I have an IAX trunk between the two machines, able to make a call from the raspberry Pi to the PIAF green dialing a prefix and internal 3 digit extension. However, I can't make the same call from the PIAF Green machine to the Raspberry Pi using the same convention prefix and 3 digit extension. The Asterisk CLI shows the Raspberry Pi hanging up on the connection coming from the PIAF green machine.

The log file showing the rejection is shown below:
-- Executing [s@macro-dialout-trunk:22] Dial("SIP/103-0000003b", "IAX2/raspi-main/702,300,Tt") in new stack
-- Called IAX2/raspi-main/702
-- Hungup 'IAX2/raspi-main-14343'

The log file showing the successful call from the Raspberry Pi to the PIAF Green is shown below:

-- Executing [s@macro-dialout-trunk:22] Dial("SIP/702-00000133", "IAX2/incrediblepbx/100,300,") in new stack
-- Called IAX2/incrediblepbx/100
-- Call accepted by xxx.xxx.xxx.xxx (format ulaw)
-- Format for call is (ulaw)
-- IAX2/incrediblepbx-12550 is ringing

Anybody have any thoughts on why I can't make this call from the PIAF Green/Incredible PBX machine to the Raspberry Pi?

 

[rossiv]

Anything relevant on the other side of the logs?

 

[Tony Bui]

pretty much the same for both calls except for the hang up and the ring scenario. No logs show up in the raspi on why it hangs up.

Here's more of the logs before the successful call and hung call

successful call log from Raspi to PIAF
-- Executing [s@macro-dialout-trunk:13] Set("SIP/702-00000133", "OUTNUM=100") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/702-00000133", "custom=IAX2/incrediblepbx") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/702-00000133", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default))") in new stack
-- Executing [s@macro-dialout-trunk:16] ExecIf("SIP/702-00000133", "0?Set(DIAL_TRUNK_OPTIONS=M(confirm))") in new stack
-- Executing [s@macro-dialout-trunk:17] Macro("SIP/702-00000133", "dialout-trunk-predial-hook,") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/702-00000133", "") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/702-00000133", "0?bypass,1") in new stack
-- Executing [s@macro-dialout-trunk:19] ExecIf("SIP/702-00000133", "1?Set(CONNECTEDLINE(num,i)=100)") in new stack
-- Executing [s@macro-dialout-trunk:20] ExecIf("SIP/702-00000133", "1?Set(CONNECTEDLINE(name,i)=CID:702)") in new stack
-- Executing [s@macro-dialout-trunk:21] GotoIf("SIP/702-00000133", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:22] Dial("SIP/702-00000133", "IAX2/incrediblepbx/100,300,") in new stack
 
unsuccessful call log from PIAF/Incred PBX to Raspi
 
-- Executing [s@macro-dialout-trunk:12] GosubIf("SIP/103-0000000c", "0?sub-flp-5,s,1()") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/103-0000000c", "OUTNUM=702") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/103-0000000c", "custom=IAX2/raspi-main") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/103-0000000c", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)Tt)") in new stack
-- Executing [s@macro-dialout-trunk:16] ExecIf("SIP/103-0000000c", "0?Set(DIAL_TRUNK_OPTIONS=TtM(confirm))") in new stack
-- Executing [s@macro-dialout-trunk:17] Macro("SIP/103-0000000c", "dialout-trunk-predial-hook,") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] NoOp("SIP/103-0000000c", "*** 702 ***") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:2] Set("SIP/103-0000000c", "num2find=702") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:3] Set("SIP/103-0000000c", "OrigCID=103") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:4] Set("SIP/103-0000000c", "OrigCNAM=Tony Bui Ipad Bria") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:5] Set("SIP/103-0000000c", "CALLERID(num)=702") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:6] Set("SIP/103-0000000c", "CURLOPT(httptimeout)=7") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:7] Set("SIP/103-0000000c", "lookupcid=702") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:8] Set("SIP/103-0000000c", "CALLERID(name)=Tony Bui Ipad Bria") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:9] Set("SIP/103-0000000c", "lookupcid=") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:10] Set("SIP/103-0000000c", "CALLERID(name)=") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:11] NoOp("SIP/103-0000000c", "*** ***") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:12] Set("SIP/103-0000000c", "CDR(accountcode,r)=") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:13] Set("SIP/103-0000000c", "CONNECTEDLINE(num,i)=702") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:14] Set("SIP/103-0000000c", "CONNECTEDLINE(name,i)=") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:15] Set("SIP/103-0000000c", "CALLERID(num)=103") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:16] Set("SIP/103-0000000c", "CALLERID(name)=Tony Bui Ipad Bria") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:17] MacroExit("SIP/103-0000000c", "") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/103-0000000c", "0?bypass,1") in new stack
-- Executing [s@macro-dialout-trunk:19] ExecIf("SIP/103-0000000c", "0?Set(CONNECTEDLINE(num,i)=702)") in new stack
-- Executing [s@macro-dialout-trunk:20] ExecIf("SIP/103-0000000c", "0?Set(CONNECTEDLINE(name,i)=CID:103)") in new stack
-- Executing [s@macro-dialout-trunk:21] GotoIf("SIP/103-0000000c", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:22] Dial("SIP/103-0000000c", "IAX2/raspi-main/702,300,Tt") in new stack
-- Called IAX2/raspi-main/702
[2013-12-23 01:01:24] WARNING[28069]: chan_iax2.c:3552 __attempt_transmit: Max retries exceeded to host xxx.xxx.xxx.xxx on IAX2/raspi-main-1494 (type = 6, subclass = 1, ts=4, seqno=0)
-- Hungup 'IAX2/raspi-main-1494'

 

[Tony Bui]

Wondering if this could be an IAX port issue?

 

[Tony Bui]

I followed this example verbatim and was able to successfully connect from both ends.

http://www.cadvision.com/blanchas/Asterisk/IAX2Trunk.html

 

[wardmundy]

For ease of reference, here is Eugene's spreadsheet for interconnecting servers with IAX2:

 

[rossiv]

For ease of reference, here is Eugene's spreadsheet for interconnecting servers with IAX2:

It's also posted in the resources section for easy downloading.

 

[Tony Bui]

I used this resource first http://nerdvittles.com/?p=3536, but could only get the raspi to dial a PIAF Green extension successfully. This article did the trick. http://www.cadvision.com/blanchas/Asterisk/IAX2Trunk.html