Rhino Equipment LCD

[kcallis]

I moved my client from Trixbox CE to the latest, greatest version of PIAF 1.7.5.5.4. On the front of the Rhino Ceros Desktop, there is a LCD display with originally had some trivial information.
It there anyway to get the LCD configured and able to display information or do I need to contact Rhino to solve this issue.

 

[reconwireless]

Try This

Here is a link to an article I used last time I configured one... seems there is also a .conf file somewhere that you need to edit with your information, I can't remember where that is without actually installing, I'm not certain but the script may tell you where that file is.

RSLI (CEROS LCD) installation

Introduction
This article covers the install of the RSLI package which operated the front panel of the CEROS. These instructions are intended to allow people who deviate from the standard CEROS image to have use of their front panel display. The RSLI is distributed as a platform independent RPM. This should work on any 32bit OS but has only been tested on CentOS based solutions.

Information
1. Grab the RPM
wget http://dist.rhinoequipment.com/rsli/latest -O rsli-current.rpm
2. Install the RPM
rpm -ivh rsli-current.rpm
3. This system starts and stops with an init script. The display should load on reboot if it does not load on install.