GOOD NEWS Sangoma 100G-Want to share that It's great

[MrBostn]

We're moving offices Jan 24th. We're subletting our current space and management wanted to leave the phone system to help rent the space. I suggested an Asterisk system - PBXINAFLASH.

At the new space we have a PRI (have one under contract) and plan on virtualizing (on Hyper-V 2012) PBXINAFLASH. (I do have a backup server in case this goes south)

To interface with the PRI I bought a Sangoma 100G for $970 or so. I set it up on the network, configured an IP and created a SIP trunk between it and my PIAF box.
I've been anxious to test this before the move. Since I arrive work about 7am (way before users) I unplugged the PRI from our current PBX (Nortel) plugged it into the Sangoma, dialed my DID from my Cell-It worked!

I had some initial trouble with incoming calls but Sangoma Support was great and helped me out quickly. It was just a setting within the Vega.

I'm very relieved it worked. I thought it would be so much more difficult than it was.

Just wanted to share this as there are very few people that use these.

 

[atsak]

What was the setting? In case someone else makes the same mistake. If you have time outline what needs to be done - it's always helpful to have real world instructions

 

[MrBostn]

Sure-External Incoming calls failed. No sound either way AND the caller ID on the phone displayed AuthUser Caller ID.

This was the fix from Sangoma:
In the Vega WebUI

Expert Config > SIP > SIP Profile > 'modify'

In the first table there is a parameter "From header user info" - I think this is currently set to "Auth Username" - please make sure this is set to "calling party"

So other than this setting, and setting up the units IP etc, it was damn close to plug and play.

 

[phoneguy]

We have used all of Vegas with great success and have become our standard gateway we sell.

 

[htitx]

What version of PBXIAF are you using, I am asking because I just pulled the trigger and bought the Sangoma 100G as well.

Thanks in advance