Sangoma not dialing.

[angoyr]

Sangoma not dialing. (Canceled)

Hello All,

I just installed a Sangoma U100 FXO for the first time and I'm kinda lost. When I try to send a call out, I see the following in the log, the phone is off hook but it doesn't dial the number. I may be having a configuration problem. Any help would be appreciated.

Dial("IAX2/4009-12884", "ZAP/g0/1XXXNNN6569|300|") in new stack
[2009-09-04 16:32:44] DEBUG[5322] chan_zap.c: Dialing '1XXXNNN6569'
[2009-09-04 16:32:44] DEBUG[5322] chan_zap.c: Deferring dialing...
[2009-09-04 16:32:44] VERBOSE[5322] logger.c:     -- Called g0/1XXXNNN6569
[2009-09-04 16:32:44] DEBUG[5322] chan_zap.c: Sent deferred digit string: T1XXXNNN6569w
[2009-09-04 16:32:47] VERBOSE[5322] logger.c:     -- Zap/1-1 answered IAX2/4009-12884
[2009-09-04 16:33:29] VERBOSE[5330] logger.c: == Parsing '/etc/asterisk/manager.conf': [2009-09-04 16:33:29] VERBOSE[5330] logger.c: Found

Another problem is: If I disconnect the phone line from the box, the whole DSL network goes down and I have to reboot the PIAF box.

Robin.

 

[Phone_User]

Set your verbosity to 10 and dial again and post that log. Need more details.

Also what version of the wanpipe drivers are you using.

The phone line should not affect your dsl. Do you have the filters on the phone line?

Rob

 

[angoyr]

Rob,

Thanks for your response. For a moment I thought I was black listed. (No responses to my last 3 posts). Anyhow I really do appreciate your help, but the customer canceled just last night because I took to long to get it working. I recommended it based on the good things users on this forum had to say about it.

The customer will be sending it to me and I'll try it on my network.

Rob.