I have CallerID Superfecta 2.11.14 installed on my PBX.
I have created a callerid scheme 'ABC' which has the Asterisk Phonebook and OpenCNAM enabled.
In FreePBX my inbound route has CID Lookup Source set to none and Enable CID Superfecta enabled and the scheme set to 'ABC'.
In my phonebook I have a number set (with a speed dial, as though that mattered) as 1xxxyyyzzzz as well as removing the 1 (ie 10 digits or 1 and 10 digits). Regardless, the callerID name doesn't show on my phone - just the incoming number.
When I run a test in the Superfecta module, the name associated with the number shows up as what would be returned.
I'm doing something wrong, but I don't know/understand what.
Is the status info if it matters.
Andrew
I have created a callerid scheme 'ABC' which has the Asterisk Phonebook and OpenCNAM enabled.
In FreePBX my inbound route has CID Lookup Source set to none and Enable CID Superfecta enabled and the scheme set to 'ABC'.
In my phonebook I have a number set (with a speed dial, as though that mattered) as 1xxxyyyzzzz as well as removing the 1 (ie 10 digits or 1 and 10 digits). Regardless, the callerID name doesn't show on my phone - just the incoming number.
When I run a test in the Superfecta module, the name associated with the number shows up as what would be returned.
I'm doing something wrong, but I don't know/understand what.
Code:
lqqqqqqqqqqqqqqqqqqqqqqqqSYSTEM INFORMATIONqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x Asterisk = ONLINE | Dahdi = ONLINE | MySQL = ONLINE x
x SSH = ONLINE | Apache = ONLINE | Iptables = ONLINE x
x Fail2ban = ONLINE | Internet = ONLINE | Ip6Tables = ONLINE x
x Disk Free = ADEQUATE| Mem Free = ADEQUATE| NTPD = ONLINE x
x SendMail = ONLINE | Samba = OFFLINE | Webmin = ONLINE x
x Ethernet0 = ONLINE | Ethernet1 = N/A | Wlan0 = N/A x
x x
x PIAF Installed Version = 2.0.6.5 under *HARDWARE* x
x FreePBX Version = 2.11.0.38 x
x Running Asterisk Version = 11.10.0 x
x Asterisk Source Version = 11.10.0 x
x Dahdi Source Version = 2.9.0 x
x Libpri Source Version = 1.4.14 x
x IP Address = 192.168.40.29 on eth0 x
x Operating System = CentOS release 6.5 (Final) x
x Kernel Version = 2.6.32-431.1.2.0.1.el6.x86_64 - 64 Bit x
x Incredible Version = 11.10 x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjIs the status info if it matters.
Andrew
Phone System 