PIAF Help...

[DGrant303]

I am currently using Trixbox 2.8.0.4 and have been trying to switch over to PIAF for some tme now. Have never been able to get PIAF actually working..

I am using the latest verison, Purple Edition which includes Asterisk 1.8. Everything installs perfectly, my ATA (Sipura) connects to PIAF, can make internal calls but I cannot for the life of me get VOIPStreet trunk to work!

I set the trunk up, add inbound and outbound routes and when I go to Tools/Asterisk Info/SIP Info, it shows the trunk as being "registered" but calls are not even hitting PIAF.

With Tribox, as long as the trunk is set up correctly, if something is wrong with the Inbound Route, you will hear the Asterisk recording saying the line is not in service. I currently have a "fail safe" number programmed on my VOIPStreet Trunk where is the service is down, it transfer over to my cell. phone. When I call my Voipstreet Trunk form a POTS landline phone, the call transfers over to my cell phone, thus not even hitting PIAF.

I have a gut feeling it is something to do with the dial pattern in PIAF. The new Dial Pattern fill in boxes in FreePBX are new to me as Trixbox simply uses freeform text. I normally use: [FONT='Verdana','sans-serif']1+NXXNXXXXXX as my dial plan in the trunk settings but not sure how to format this into the Dial Plan boxes on FreePBX.[/FONT]
[FONT='Verdana','sans-serif']
Any thoughts on this? I am dying to get PIAF working![/FONT]

 

[Stewart]

If incoming calls aren't even hitting your Asterisk, it's not a configuration problem. It's a routing or firewall problem. It could be an issue of iptables or even your router. You could check the iptables log or capture your packets and view them in wireshart. Tcpdump will grab them whether or not iptables stops it. That will help diagnose.

 

[bk1]

Are you trying to setup PIAF while still using trixbox on the same network?

The problem may be you are forwarding necessary ports to your trixbox's internal IP address and not your PIAF internal ip address.

You can't forward the same ports to both.