NO JOY piaf3 borked install... help....

[womble1]

so far have got to this....
have insatalled anew copy of cent OS 6.5 as detailed here....
http://nerdvittles.com/?p=9526

the pone thing that did fail was the kernel-devel install which came back with a 404 not found error 4 times...
I just did the following...

./piaf3-install

it downloads a load of stuff without error... (takes few minutes i.e. 100 seconds to 120 seconds then restarts and comes up with a login, I login and it just presents a bash prompt... not sure where to go...

 

[atsak]

Did you miss this step

# for CentOS/Scientific Linux 6.5/6.6 only, perform these additional steps:
wget http://pbxinaflash.com/update-kernel-devel
chmod +x update-kernel-devel
./update-kernel-devel
reboot

 

[womble1]

Did you miss this step

# for CentOS/Scientific Linux 6.5/6.6 only, perform these additional steps:
wget http://pbxinaflash.com/update-kernel-devel
chmod +x update-kernel-devel
./update-kernel-devel
reboot

Not really I did thatt 4 times but the wget came back with a 404 error... as mentioned in my post.

 

[womble1]

OK I logged in via ssh and did all that ( I got a typo) and still it installs and restarts but just comes up with a bash prompt.... no installer....

 

[synack]

You likely will need to restart the install. without the kernel devel, the other install will fail as well. You might be able to get away with rerunning the remaining installs, but you will most likely have some inconsistent state. The last time I looked the installers do not support "fixing" broken installs. Might I add that as soon as you have a working centos, you should do the remaining installs with ssh/putty. In addition to the copy/paste benefit, there was some strange behaviour with small console windows during the asterisk build. I believe the install text says to ssh in and maximize the window. (this may be fixed now, but it wasn't the last time I ran that installer)

 

[atsak]

The file doesn't give a 404 now, but maybe the CentOS repo is missing suddenly?

 

[synack]

The file doesn't give a 404 now, but maybe the CentOS repo is missing suddenly?

I think womble1 said he typo'd. I checked that too

 

[womble1]

ok looks all good now....!

 

[wa4zlw]

Hi folks...I'm borked here as well :-(

Tonight I tried this a second time and after waiting an hour or so asterisk does not get built. I saw some error fly by that said something about a server limit of 5 or something.

I used the centos 6.5 minimal iso and I'm running it under vSphere 5.5

anyone have any ideas?

Thanks leon

 

[wa4zlw]

heres some info:

root@pbx:~ $ status > t.t
/usr/local/sbin/status: line 12: asterisk: command not found
/usr/local/sbin/status: line 24: asterisk: command not found
webmin: unrecognized service



WARNING: Always run Incredible PBX VM behind a secure hardware-based firewall.
root@pbx:~ $ status
/usr/local/sbin/status: line 12: asterisk: command not found
/usr/local/sbin/status: line 24: asterisk: command not found
webmin: unrecognized service

Incredible PBX 11.17.1 for CentOS 6
Asterisk: DN Apache: UP MySQL: UP
SendMail: UP IPtables: UP SSH: UP
LAN port: UP Fail2Ban: UP Webmin: UP
RAM: CentOS release 6.6 Disk:22G
Asterisk Incredible GUI 2.11.0.34
Private IP: 10.161.51.24 10.195.13.196
Public IP: x.x.x.x
System Time: Thu May 21 22:24:15 EDT 2015

 

[womble1]

Hi folks...I'm borked here as well :-(

Tonight I tried this a second time and after waiting an hour or so asterisk does not get built. I saw some error fly by that said something about a server limit of 5 or something.

I used the centos 6.5 minimal iso and I'm running it under vSphere 5.5

anyone have any ideas?

Thanks leon

Did you format the drive correctly ?

 

[wa4zlw]

i didnt have to. everything but asterisk got built correctly. I installed the operating system and it did what was necessary to create the appropriate partitions etc.

thans leon

 

[womble1]

I think you need to look at this....

http://nerdvittles.com/?p=9526

specifically this....

1. Install or upgrade existing system
2. Test media [skip]
3. Begin setup [Next]
4. Choose language [English]
5. Keyboard [U.S. English]
6. Type Devices [Basic Storage Devices]
7. Discard Existing Data [yes]
8. Hostname [localhost.localdomain] ** BEFORE YOU CLICK NEXT, DO STEP 8a. **
8a. Configure Network [Click eth0 & Edit. Check:Connect Automatically then Apply & Close]
9. Time Zone [New York] ** Uncheck: System Clock Uses UTC **
10. Root Password [** make it very secure **]
11. Type Installation: Create Custom Layout with Primary Partition checked for 11a and 11c
11a. Create -> Standard Partition -> Mount Point: /boot Type: ext4 Size:200 Fixed
11b. Create -> Standard Partition -> Mount Point: blank Type: swap Size:2048 Fixed
11c. Create -> Standard Partition -> Mount Point: / Type: ext4 Size:Fill to Max Size
12. NEXT
13. FORMAT
14. WRITE CHANGES
15. Checked: Install boot loader on /dev/sda Boot loader CentOS List: /dev/sda3
16. Reboot when finished

 

[wa4zlw]

Hi there! Yes I followed the articles when I installed CentOS it created the partitions. As I said asterisk failed but freepbx and everything around it installed.

Thanks leon

 

[womble1]

Did you follow the exact patition instructions ? I think you made a mistake

 

[wa4zlw]

it didnt ask me for any, it created it itself.

i'll double check tonite and try it again.

thanks!!!

 

[womble1]

it didnt ask me for any, it created it itself.

i'll double check tonite and try it again.

thanks!!!

You haven't followed all the steps READ my first reply to you.....

 

[wa4zlw]

thanks Its always possible i overlooked something

Leon

 

[wa4zlw]

ok tried it two more times.

first was with ubu and let it auto configure. same thing
tonight I went back to centos 3.6 and manually configured the partitions as you said before. auto config uses LVM the sizes are very similar to the manual ones. But this time I wanted to be sure. died again:

centos

var/www/html/admin/i18n/zh_CN/LC_MESSAGES/amp.mo
var/www/html/admin/i18n/zh_CN/LC_MESSAGES/amp.po
var/www/html/admin/ajax.php
Starting mysqld: [ OK ]
Starting httpd: WARNING: MaxClients of 256 exceeds ServerLimit value of 5 servers,
lowering MaxClients to 5. To increase, please see the ServerLimit
directive.
[ OK ]

/etc/amportal.conf: line 740: reg: command not found
/etc/amportal.conf: line 897: http://feeds.feedburner.com/InsideTheAsterisk: No such file or directory

/etc/amportal.conf: line 740: reg: command not found
/etc/amportal.conf: line 897: http://feeds.feedburner.com/InsideTheAsterisk: No such file or directory
SETTING FILE PERMISSIONS................Done
Removing any dangling symlinks
Dangling symlinks removed

STARTING ASTERISK
Asterisk Started

Please wait...

sh: asterisk: command not found
Error(s) have occured, the following is the retrieve_conf output:
exit: 1
[FATAL] Unable to connect to Asterisk Manager from /var/lib/asterisk/bin/retrieve_conf, aborting
./IncrediblePBX12.sh: line 416: asterisk: command not found
mkdir: cannot create directory `/etc/pbx': File exists

Randomizing all of your extension 701 and DISA passwords...
sh: asterisk: command not found
Error(s) have occured, the following is the retrieve_conf output:
exit: 1
[FATAL] Unable to connect to Asterisk Manager from /var/lib/asterisk/bin/retrieve_conf, aborting
sh: asterisk: command not found

 

[wa4zlw]

looking back in putty it seems there is lots of errors like this; see attached file