GO HERE PJSIP on RPi2 - Anyone have it working?

[jerrm]

PJSIP does not work on RPi2 builds using http://nerdvittles.com/?p=14787.

PJSIP starts out flaky and degrades to complete unresponsiveness.

I've tried it on several Pi installs. Went back and did a fresh virgin install, carefully monitored for errors. Only post-install configuration was to enable PJSIP. Still broken/same results.

A fresh IPBX iso install to an ESXi VM works. A new raspbx install works. It only seems broken on IPBX/RPi2. All tested with the same endpoints.

I haven't dug into comparing the Pi and iso build scripts yet. Hoping someone knows the issue and has a fix.

 

[wa4zlw]

Have you tried from the CLI to upgrade asterisk to latest?

Leon

 

[jerrm]

The fresh build is already the latest 13.7.2. The others are 13.7 builds.

 

[wa4zlw]

I had all sorts of issues with BLF and what not and once I did the upgrade from CLI that solved a pile of problems. I think just recompiling it was the key

ldz

 

[jerrm]

I had all sorts of issues with BLF and what not and once I did the upgrade from CLI that solved a pile of problems. I think just recompiling it was the key

Recompile/Install didn't help on Wheezy.

 

[jerrm]

The Jessie version APPEARS to be OK. Still need to stress it some, but it seems OK on the first pass.

 

[wardmundy]

If you need PJsip, by all means switch to the Jessie build.

 

[jerrm]

If you need PJsip, by all means switch to the Jessie build.

I'm sure I will, but this has gotten under my skin. Just wish I knew who/what/why/where the issue is.

 

[wardmundy]

There was a pjproject quirk in earlier builds. Look for the Raspberry Pi section in this post: https://wiki.asterisk.org/wiki/display/AST/Building+and+Installing+pjproject